CB2012T101_技术文档

Notice for TAIYO YUDEN productsꢀ

Please read this notice before using the TAIYO YUDEN products.

REMINDERS

■ Product information in this catalog is as of October 2009. All of the contents speciﬁed herein are subject to change

without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-

fore practical application or usage of the Products.

Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-

rating such products, which are caused under the conditions other than those speciﬁed in this catalog or individual

speciﬁcation.

■ Please contact Taiyo Yuden Co., Ltd. for further details of product speciﬁcations as the individual speciﬁcation is

available.

■ Please conduct validation and veriﬁcation of products in actual condition of mounting and operating environment

before commercial shipment of the equipment.

■ All electronic components or functional modules listed in this catalog are developed, designed and intended for

use in general electronics equipment.(for AV, office automation, household, office supply, information service,

telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any

equipment in the ﬁeld such as transportation,( automotive control, train control, ship control), transportation signal,

disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have

direct inﬂuence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.

Do not incorporate the products into any equipment in ﬁelds such as aerospace, aviation, nuclear control, subma-

rine system, military, etc. where higher safety and reliability are especially required.

In addition, even electronic components or functional modules that are used for the general electronic equipment,

if the equipment or the electric circuit require high safety or reliability function or performances, a sufﬁcient reliabil-

ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to

install a protective circuit is strongly recommended at customer's design stage.

■ The contents of this catalog are applicable to the products which are purchased from our sales ofﬁces or distribu-

tors (so called“TAIYO YUDEN’s ofﬁcial sales channel”).

It is only applicable to the products purchased from any of TAIYO YUDEN’s ofﬁcial sales channel.

■ Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-

cur in connection with a third party's intellectual property rights and other related rights arising from your usage of

products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.

■ Caution for export

Certain items in this catalog may require speciﬁc procedures for export according to“Foreign Exchange and For-

eign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and other applicable regulations.

Should you have any question or inquiry on this matter, please contact our sales staff.

notice_e-01

(

)

WOUND CHIP INDUCTORS LB SERIES

REFLOW

■ FEATURES

■ APPLICATIONS

Wound Chip Inductors cover customers' wide range module designs by

wide-line-up shape, standard, low Rdc, and high electric current series.

◦Dꢀ SC/DVC/HDD, LCD, portable telephones, game equipments.

ꢀ Various audio-visual equipments, various communication equipments,

etc.

◦ꢀLB/LBR Series：Super low Rdc and high Idc characteristics.

◦ꢀLB3218 Series： This series is downsized from 3225 size. Land pat-

tern can be used by 3225 size.

◦LBMF1608

The best efﬁciency design is achieved by adopting bottom-surface elec-

trode structure. Because of 1608 shape, it can be high-density mounting.

■ ORDERING CODE

L B △ 2 0 1 2 T 1 0 0 △ △ △ △ △

❶

❷

❸

❹

❺

❻

❼

❽

❶Type

LB Wound chip inductor

❸External Dimensions

〔mm〕

❹Packaging

Tape & Reel

❺Nominal

❻Inductance

❼Special

❽Internal code

Inductance〔μH〕

Tolerances〔％〕

K

code

T

Standard

Products

△△△

1608（0603） 1.6×0.8

2012（0805） 2.0×1.25

2016（0806） 2.0×1.6

2518（1007） 2.5×1.8

3218（1207） 3.2×1.8

3225（1210） 3.2×1.5

example

±10

±20

Standard

products

△

1R0

100

101

1

M

△＝Blank space

❷Shape

Standard products

Low Rdc

type

10

△

C

R

100

High current

Low Rdc

※R=decimal point

R

Bottom-surface

electrode

MF

■ EXTERNAL DIMENSIONS/STANDARD QUANTITY

EXTERNAL DIMENSIONS

Standard Quantity [pcs]

Type

L

W

T

e

C

Paper

Tape

Embossed

Tape

3.2±0.2

2.5±0.2

0.6±0.3

LBC3225

LB3218

－

1000

2000

（0.128±0.008）（0.098±0.008）（0.098±0.008）（0.024±0.012）

A

B

A

3.2±0.2

1.8±0.2

0.6±0.2

（0.128±0.008）（0.071±0.008）（0.071±0.008）（0.024±0.008）

LB2518

LBC2518

LBR2518

Unit：mm

C

2.5±0.2 1.8±0.2 1.8±0.2 0.5±0.2

－

2000

－

Surface Mounting

（0.098±0.008）（0.071±0.008）（0.071±0.008）（0.020±0.008）

TYPE

1608

A

B

・ Mounting and soldering con-

ditions should be checked

beforehand.

・ Applicable soldering process

to those products is reﬂow

soldering only.

0.55

0.7

0.8

1.2

1.6

1.0

LB2016

LBC2016

2.0±0.2 1.6±0.2 1.6±0.2 0.5±0.2

MF1608 0.55

0.9

（0.079±0.008）（0.063±0.008）（0.063±0.008）（0.020±0.008）

2.0±0.2 1.25±0.2 1.25±0.2 0.5±0.2

2012

2016

2518

3218

3225

0.7

0.8

1.0

1.45

1.8

LB2012

LBC2012

LBR2012

（0.079±0.008）（0.049±0.008）（0.049±0.008）（0.020±0.008）

2.0

・

Recommended Land Patterns

1.6±0.1 0.8±0.1 0.8±0.1 0.35±0.15

2.0

LB1608

4000

（0.063±0.004）（0.031±0.004）（0.031±0.004）（0.014±0.006）

1.6±0.2 0.8±0.2 0.8±0.2 0.45±0.15

（0.063±0.008）（0.031±0.008）（0.031±0.008）（0.016±0.006）

2.0

LBMF1608

－

3000

Unit：mm（inch）

■ AVAILABLE CAPACITANCE RANGE

Type

LB3218

LB2518

LB2016

LB2012

LB1608

LBC3225

LBC2518

LBC2016

LBC2012

LBR2518

LBR2012

LBMF1608

Range

Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］ Imax［. mA］ꢁRdc±30％［Ω］

1075 1μH 0.06

665

165

60

1μH 0.06

0.25

490

155

40

1μH 0.09

405

120

45

1μH 0.15

160

70

1μH 0.17 1100 1μH 0.055 775

1μH 0.08

690

245

75

1μH

0.1

0.82

8.0

620

1μH 0.19

960

235

80

1μH 0.045 400

1μH 0.07

0.36

230

1μH 0.09

1

10

0.55

340

140

0.25

2.40

0.5

0.7

60

0.7

540

0.133 375

0.36

200

90

1.2

5.8

0.19

150

80

35

0.36

2.5

10μH

47μH

2.1

4.5

7.0

150

1.4

125

45

3.70

1.89

50

4.0

100

100μH

680μ

100μH

H

28.0

40

27

15

24

680μH

1000

1000μH

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound01_e-01

42

■ PART NUMBERS

●LB1608 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB 1608T1R0M

LB 1608T2R2M

LB 1608T4R7M

LB 1608T8R2M

LB 1608T100M

RoHS

1.0

2.2

4.7

8.2

10

100

80

45

32

0.17

0.33

0.55

0.70

160

115

70

7.96

2.52

±20%

60

32

60

●LB2012 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB 2012T1R0M

LB 2012T2R2M

LB 2012T3R3M

LB 2012T4R7M

LB 2012T6R8M

LB 2012T100□

LB 2012T100□R

LB 2012T150□

LB 2012T220□

LB 2012T470□

LB 2012T680□

LB 2012T101□

RoHS

1.0

2.2

3.3

4.7

6.8

10

100

80

55

45

38

32

28

16

11

10

8

0.15

0.23

0.30

0.40

0.47

0.70

0.50

1.3

405

260

235

190

135

120

100

80

±20%

7.96

10

15

2.52

±10%

±20%

22

1.7

47

3.7

60

68

6.0

50

100

7.0

45

0.796

●LB2016 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB 2016T1R0M

LB 2016T1R5M

LB 2016T2R2M

LB 2016T3R3M

LB 2016T4R7M

LB 2016T6R8M

LB 2016T100□

LB 2016T150□

LB 2016T220□

LB 2016T330□

LB 2016T470□

LB 2016T680□

LB 2016T101□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

80

70

55

45

38

32

28

16

14

11

10

8

0.09

0.11

0.13

0.20

0.25

0.35

0.50

0.70

1.0

490

380

375

285

225

200

155

130

105

85

±20%

7.96

15

22

2.52

±10%

±20%

33

1.7

47

2.4

70

68

3.0

55

100

4.5

40

0.796

●LB2518 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB 2518T1R0M

LB 2518T1R5M

LB 2518T2R2M

LB 2518T3R3M

LB 2518T4R7M

LB 2518T4R7MR

LB 2518T6R8M

LB 2518T100□

LB 2518T150□

LB 2518T220□

LB 2518T330□

LB 2518T470□

LB 2518T680□

LB 2518T101□

LB 2518T151□

LB 2518T221□

LB 2518T331□

LB 2518T471□

LB 2518T681□

LB 2518T102□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

80

0.06

0.07

0.09

0.11

0.13

0.10

0.15

0.25

0.32

0.50

0.70

0.95

1.5

665

405

340

280

240

235

195

165

145

115

95

68

±20%

54

7.96

2.52

46

38

30

15

23

22

19

33

15

47

12

85

68

9.5

9.0

7.0

5.5

4.5

3.5

3.0

2.4

70

±10%

±20%

100

150

220

330

470

680

1000

2.1

60

3.2

45

4.5

40

0.796

0.252

7.0

30

10

25

17

20

24

15

・□Please specify the Inductance tolerance code（K or M）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound01_e-01

43

■ PART NUMBERS

●LB3218 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB 3218T1R0M

LB 3218T1R5M

LB 3218T2R2M

LB 3218T3R3M

LB 3218T4R7M

LB 3218T6R8M

LB 3218T100□

LB 3218T150□

LB 3218T220□

LB 3218T330□

LB 3218T470□

LB 3218T680□

LB 3218T101□

LB 3218T151□

LB 3218T221□

LB 3218T331□

LB 3218T471□

LB 3218T681□

LB 3218T102□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

80

68

54

41

0.06

0.07

0.09

0.11

0.13

0.17

0.25

0.32

0.49

0.75

0.92

1.49

2.4

1075

860

775

560

550

380

340

300

255

215

205

145

140

105

80

±20%

7.96

2.52

40

30

25

15

22

19

33

15

47

12

68

11

±10%

±20%

100

150

220

330

470

680

1000

8.0

7.0

5.0

4.0

3.5

3.0

2.4

3.2

5.4

0.796

0.252

7.0

65

14

54

17

45

27

39

●LBMF1608 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LBMF1608T1R0M

LBMF1608T2R2M

LBMF1608T3R3M

LBMF1608T4R7M

LBMF1608T100□

LBMF1608T220□

LBMF1608T470□

RoHS

1.0

2.2

3.3

4.7

10

100

80

60

45

32

16

11

0.09

0.17

0.22

0.24

0.36

1.0

230

160

130

110

80

±20%

7.96

2.52

±10%

±20%

22

50

47

2.5

35

●LBC3225 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB C3225T1R0MR

LB C3225T1R5MR

LB C3225T2R2MR

LB C3225T3R3MR

LB C3225T4R7MR

LB C3225T6R8MR

LB C3225T100□R

LB C3225T150□R

LB C3225T220□R

LB C3225T330□R

LB C3225T470□R

LB C3225T680□R

LB C3225T101□R

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

250

220

190

160

70

50

23

20

17

0.055

0.060

0.080

0.095

0.100

0.120

0.133

0.195

0.270

0.410

0.670

1.00

1100

1000

930

820

680

620

540

420

330

300

220

190

150

±20%

0.1

15

22

±10%

±20%

33

13

47

10

68

8

100

6

1.40

●LBC2518 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB C2518T1R0M

LB C2518T1R0MR

LB C2518T1R5M

LB C2518T2R2M

LB C2518T3R3M

LB C2518T4R7M

LB C2518T6R8M

LB C2518T100□

LB C2518T150□

LB C2518T220□

LB C2518T330□

LB C2518T470□

LB C2518T680□

LB C2518T101□

LB C2518T151□

LB C2518T221□

LB C2518T331□

LB C2518T471□

LB C2518T681□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

80

0.08

0.065

0.11

0.13

0.16

0.20

0.30

0.36

0.65

0.77

1.5

775

890

730

630

560

510

420

375

285

250

185

165

140

125

95

±20%

68

7.96

54

41

38

30

15

23

22

19

2.52

33

15

47

12

1.9

68

9.5

9.0

7.0

5.5

4.5

3.0

2.8

±10%

±20%

100

150

220

330

470

680

3.7

6.1

8.4

80

0.796

12.3

22

65

50

28

45

・□Please specify the Inductance tolerance code（K or M）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound01_e-01

44

■ PART NUMBERS

●LBC2016 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB C2016T1R0M

LB C2016T1R5M

LB C2016T2R2M

LB C2016T3R3M

LB C2016T4R7M

LB C2016T6R8M

LB C2016T100□

LB C2016T150□

LB C2016T220□

LB C2016T330□

LB C2016T470□

LB C2016T680□

LB C2016T101□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

80

70

55

45

38

32

28

16

14

11

10

8

0.10

0.15

0.20

0.27

0.37

0.59

0.82

1.2

690

600

520

410

355

290

245

200

165

135

110

95

±20%

7.96

15

22

1.8

2.52

±10%

±20%

33

2.8

47

4.3

68

7.0

100

8.0

75

0.796

●LBC2012 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB C2012T1R0M

LB C2012T2R2M

LB C2012T4R7M

LB C2012T100□

LB C2012T220□

LB C2012T470□

RoHS

1.0

2.2

4.7

10

100

70

45

40

16

0.19

0.33

0.50

1.2

620

430

295

200

130

90

±20%

7.96

2.52

±10%

±20%

22

3.7

47

11

5.8

●LBR2518 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB R2518T1R0M

LB R2518T2R2M

LB R2518T4R7M

LB R2518T100□

LB R2518T220□

LB R2518T470□

LB R2518T101□

RoHS

1.0

2.2

4.7

10

100

68

45

30

19

11

9

0.045

0.07

0.10

0.19

0.44

0.84

1.89

960

480

345

235

175

120

80

±20%

7.96

22

2.52

±10%

±20%

47

100

0.796

●LBR2012 TYPE

EHS

（Environmental

Hazardous

DC

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance Self-resonant frequency

Rated current

〔mA〕max.

Ordering code

Resistance

〔Ω（〕±30％）

Tolerance

〔MHz〕min.

Substances）

LB R2012T1R0M

LB R2012T2R2M

LB R2012T4R7M

LB R2012T100□

LB R2012T220□

LB R2012T470□

LB R2012T101□

RoHS

1.0

2.2

4.7

10

100

80

45

32

16

11

8

0.07

0.13

0.24

0.36

1.0

400

260

200

150

100

75

±20%

7.96

22

2.52

±10%

±20%

47

1.7

100

4.0

50

0.796

・□Please specify the Inductance tolerance code（K or M）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound01_e-01

45

■ ELECTRICAL CHARACTERISTICS

DC Bias characteristics（Measured by HP4285A＋42841A）

■

Standard Type

LB1608

LB2012

LB2016

LB2518

100

10

1000

100

10

1000

100

10

1000

100

10

101□

100M

100□

1R0M

1

1R0M

1

0.1

1

10

100

1000

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

DC Bias〔mA〕

Standard Type

High Current Type

LB3218

LBC2012

LBC2016

LBC2518

1000

100

10

100

10

1000

100

10

1000

100

10

470□

101□

100□

101□

100□

1R0M

1

1R0M

1

0.1

10

100

1000

10000

10

100

1000

10

100

1000

10000

1

10

100

1000

10000

DC Bias〔mA〕

High Current Type

Low Rdc Type

Bottom-surface electrode Type

ＬＢＣ3225

LBR2012

LBR2518

LBMF1608

100

10

1000

100

1000

100

10

100□

101□Ｒ

4R7M

101□

100□Ｒ

1R0M

100□

1

1R0MR

100□

1

10

1

1R0M

1

1R0M

0.1

10

100

1000

10000

10

100

1000

10000

10

100

1000

10000

1

10

100

1000

10000

DC Bias〔mA〕

Impedance-vs-Frequency characteristics（Measured by HP4291A）

■

Standard Type

LB1608

LB2012

101□

100□

LB2016

LB2518

10000

1000

100

100000

10000

1000

100000

10000

100000

10000

1000

100

101□

100M

100□

1R0M

100□

1R0M

1000

100

10

1

10

1

10

1

10

100

1000

10000

1

10

100

1000

10

100

1000

10000

10

100

1000

Frequency〔MHz〕

Standard Type

High Current Type

LB3218

LBC2012

LBC2016

LBC2518

100000

10000

100000

10000

100000

10000

100000

10000

1000

101□

100□

101□

470□

100□

1R0M

1000

100

10

1000

100

10

1000

100

10

1

10

1

10

100

1000

10000

10

100

1000

10

100

1000

10000

10

100

1000

Frequency〔MHz〕

High Current Type

Low Rdc Type

Bottom-surface electrode Type

LBC3325

LBR2012

LBR2518

LBMF1608

100000

10000

100000

10000

1000

100000

10000

1000

100

100000

101□R

100□R

101□

470□

10000

100□

1R0MR

100□

1R0M

1000

100

10

1R0M

4R7M

1000

100

10

1

10

1

0.1

1

10

100

1000 10000

10

100

1000

10

100

1000

10000

1

10

100

1000

10000

Frequency〔MHz〕

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound01_e-01

46

(

)

WOUND CHIP POWER INDUCTORS CB SERIES

REFLOW

■ FEATURES

■ APPLICATIONS

◦ꢀThis series corresponds to high electric current compared with LB/

LBC series.

Wound Chip Inductors that can be used for small DC/DC converters

and are suitable for choke uses.

◦Dꢀ SC/DVC/HDD, LCD, portable telephones, game equipment.

Various audio-visual equipment, various communication equipment,

etc.

◦ꢀCBMF 1608 Series

The best efﬁciency design is achieved by adopting bottom-surface

electrode structure.

Wound Chip Inductors that are suitable for module design which

needs high electric current like DC/DC converters.

■ ORDERING CODE

C B △ 2 0 1 2 T 1 0 0 △ △ △ △ △

❶

❷

❸

❹

❺

❻

❼

❽

❶Type

❸External Dimensions

〔mm〕

❹Packaging

Tape & Reel

❺Nominal

❻

Inductance

Tolerance〔s ％〕

❼Special

❽Internal code

Inductance〔μH〕

code

CB Wound chip power inductor

T

Standard

Products

△△△

1608（0603） 1.6×0.8

2012（0805） 2.0×1.25

2016（0806） 2.0×1.6

2518（1007） 2.5×1.8

3225（1210） 3.2×2.5

example

K

±10

±20

Standard

products

△

△＝Blank space

1R0

100

101

1

M

❷Characteristic Spec

Low Rdc

type

10

△

C

L

Low Rdc

High current

Low proﬁle

R

100

※R=decimal point

MF Bottom-surface electrode

■ EXTERNAL DIMENSIONS/STANDARD QUANTITY

Standard Quantity [pcs]

Type

L

W

T

e

Paper

Tape

Embossed

Tape

C

3.2±0.2

2.5±0.2

0.6±0.3

CBC3225

－

1000

2000

－

（0.126±0.008）（0.098±0.008）（0.098±0.008）（0.024±0.012）

CB2518

CBC2518

2.5±0.2

1.8±0.2

0.5±0.2

A

B

A

（0.098±0.008）（0.071±0.008）（0.071±0.008）（0.020±0.008）

CB2016

CBC2016

2.0±0.2 1.6±0.2 1.6±0.2 0.5±0.2

（0.079±0.008）（0.063±0.008）（0.063±0.008）（0.020±0.008）

2.0±0.2 1.25±0.2 1.25±0.2 0.5±0.2

（0.079±0.008）（0.049±0.008）（0.049±0.008）（0.020±0.008）

2.0±0.2 1.25±0.2 0.9±0.1 0.5±0.2

（0.079±0.008）（0.049±0.008）（0.035±0.004）（0.020±0.008）

1.6±0.2 0.8±0.2 0.8±0.2 0.45±0.15

（0.063±0.2）（0.031±0.008）（0.031±0.008）（0.016±0.006）

－

Recommended Land Patterns

Unit：mm

C

TYPE

1608

A

B

CB2012

CBC2012

－

Surface Mounting

0.55

0.7

0.8

1.2

1.6

1.0

・Mounting and soldering con-

ditions should be checked

beforehand.

・Applicable soldering process

to those products is reﬂow

soldering only.

MF1608 0.55

0.9

CBL2012

4000

－

2012

2016

2518

3225

0.7

0.8

1.0

1.45

1.8

CBMF1608

3000

2.0

Unit：mm（inch）

2.0

・Recommended Land Patterns

■ AVAILABLE CAPACITANCE RANGE

Type

CB2518

CB2016

CB2012

CBC3225

CBC2518

CBC2016

CBC2012

CBMF1608

Range

Imax［mA］ꢁRdc±30％［Ω］ Imax［mA］ꢁRdc±30％［Ω］ Imax［mA］ꢁRdc±30％［Ω］ Imax［mA］ꢁRdc±30％［Ω］ Imax［mA］ꢁRdc±30％［Ω］ Ima［x mA］ꢁRdc±30％［Ω］ Imax［mA］ꢁRdc±30％［Ω］ Imax［mA］ꢁRdc±30％［Ω］ Imax［mA］ꢁRdc±30％［Ω］

1

1200

1μH

0.06

0.09

2.40

0.95

2.1

600

510

250

110

70

1μH

0.09

0.13

0.5

500

410

200

90

1μH

0.15

0.23

0.5

3.7

7

1440

1130

900

390

1μH 0.055 1000

1μH

0.08

0.13

0.36

1.90

1100

750

380

150

110

1μH

0.1

0.2

0.82

4.3

8

700

530

240

120

1μH

0.19

0.33

1.2

620

530

440

100

1μH

0.15

0.33

1.0

350

230

115

50

1μH

0.09

0.17

0.36

2.5

22 510

10 250

47 110

100 60

0.08

0.133

0.67

1.4

890

480

240

2.4

5.8

4.2

47μH

4.5

60

270

160

65

3.7

28

100μH

1000 25

24

680μH

1000μH

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound02_e-01

48

■ PART NUMBERS

●CB2012 TYPE

Rated current〔mA〕

EHS

（Environmental

Hazardous

Self-resonant

frequency

〔MHz〕

min.

Resistance

DC

〔Ω（〕±30％）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Temperature rise

Ordering code

Saturation current

Idc1

current

Idc2

Substances）

CB 2012T1R0M

CB 2012T2R2M

CB 2012T3R3M

CB 2012T4R7M

CB 2012T6R8M

CB 2012T100□

CB 2012T100□R

CB 2012T150□

CB 2012T220□

CB 2012T470□

CB 2012T680□

CB 2012T101□

RoHS

1.0

2.2

3.3

4.7

6.8

10

100

80

55

45

38

32

28

16

11

10

8

0.15

0.23

0.30

0.40

0.47

0.70

0.50

1.3

500

410

330

300

250

190

200

170

135

90

900

770

650

580

540

440

520

320

280

190

140

130

±20%

7.96

10

15

2.52

±10%

±20%

22

1.7

47

3.7

68

6.0

70

100

7.0

60

0.796

●CB2016 TYPE

Rated current〔mA〕

EHS

（Environmental

Hazardous

Self-resonant

frequency

〔MHz〕

min.

Resistance

DC

〔Ω（〕±30％）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Temperature rise

current

Ordering code

Saturation current

Idc1

Substances）

Idc2

CB 2016T1R0M

CB 2016T1R5M

CB 2016T2R2M

CB 2016T3R3M

CB 2016T4R7M

CB 2016T6R8M

CB 2016T100□

CB 2016T150□

CB 2016T220□

CB 2016T330□

CB 2016T470□

CB 2016T680□

CB 2016T101□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

80

70

55

45

38

32

28

16

14

11

10

8

0.09

0.11

0.13

0.20

0.25

0.35

0.50

0.70

1.0

600

550

510

400

340

300

250

210

165

130

110

90

1100

1000

800

740

600

520

440

370

270

240

210

170

7.96

±20%

15

22

2.52

±10%

±20%

33

1.7

47

2.4

68

3.0

100

4.5

70

0.796

●CB2518 TYPE

Rated current〔mA〕

EHS

（Environmental

Hazardous

Self-resonant

frequency

〔MHz〕

min.

Resistance

DC

〔Ω（〕±30％）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Temperature rise

current

Ordering code

Saturation current

Idc1

Substances）

Idc2

CB 2518T1R0M

CB 2518T1R5M

CB 2518T2R2M

CB 2518T3R3M

CB 2518T4R7MR

CB 2518T4R7M

CB 2518T6R8M

CB 2518T100□

CB 2518T150□

CB 2518T220□

CB 2518T330□

CB 2518T470□

CB 2518T680□

CB 2518T101□

CB 2518T151□

CB 2518T221□

CB 2518T331□

CB 2518T471□

CB 2518T681□

CB 2518T102□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

80

0.06

0.07

0.09

0.11

0.10

0.13

0.15

0.25

0.32

0.50

0.70

0.95

1.5

1200

650

510

440

310

340

270

250

180

165

130

110

70

1500

1400

1300

1200

1100

930

820

650

580

460

420

310

68

±20%

54

7.96

2.52

46

38

30

15

23

22

19

33

15

47

12

68

9.5

9.0

7.0

5.5

4.5

3.5

3.0

2.4

±10%

±20%

100

150

220

330

470

680

1000

2.1

60

260

210

180

140

120

90

3.2

55

4.5

50

0.796

0.252

7.0

40

10

35

17

30

24

25

75

●CBC2012 TYPE

Rated current〔mA〕

EHS

（Environmental

Hazardous

Self-resonant

frequency

〔MHz〕

min.

Resistance

DC

〔Ω（〕±30％）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Temperature rise

current

Ordering code

Saturation current

Idc1

Substances）

Idc2

CB C2012T1R0M

CB C2012T2R2M

CB C2012T4R7M

CB C2012T100□

CB C2012T220□

CB C2012T470□

RoHS

1.0

2.2

4.7

10

100

70

45

40

16

0.19

0.33

0.50

1.2

700

530

360

240

170

120

840

640

520

340

190

150

±20%

7.96

2.52

±10%

±20%

22

3.7

47

11

5.8

・□Please specify the Inductance tolerance code（Ｋor Ｍ）

※）The saturation current value（Idc1）is the DC current value having inductance decrease down to 30%.（at 20℃）

※）The temperature rise current value（Idc2）is the DC current value having temperature increase up to 40℃.（at 20℃）

※）The maximum rated current is the DC current value that satisﬁes both of DC saturation current value and temperature rise current value.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound02_e-01

49

■ PART NUMBERS

●CBC2016 TYPE

Rated current〔mA〕

EHS

（Environmental

Hazardous

Self-resonant

frequency

〔MHz〕

min.

Resistance

DC

〔Ω（〕±30％）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Temperature rise

Ordering code

Saturation current

Idc1

current

Idc2

Substances）

CB C2016T1R0M

CB C2016T1R5M

CB C2016T2R2M

CB C2016T3R3M

CB C2016T4R7M

CB C2016T6R8M

CB C2016T100□

CB C2016T150□

CB C2016T220□

CB C2016T330□

CB C2016T470□

CB C2016T680□

CB C2016T101□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

80

70

55

45

38

32

28

16

14

11

10

8

0.10

0.15

0.20

0.27

0.37

0.59

0.82

1.2

1100

1000

750

600

550

450

380

300

250

220

150

130

110

1100

1000

720

610

530

450

350

300

240

220

150

130

110

7.96

±20%

15

22

1.8

2.52

±10%

±20%

33

2.8

47

4.3

68

7.0

100

8.0

0.796

●CBC2518 TYPE

Rated current〔mA〕

EHS

（Environmental

Hazardous

Self-resonant

frequency

〔MHz〕

min.

Resistance

DC

〔Ω（〕±30％）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Temperature rise

current

Ordering code

Saturation current

Idc1

Substances）

Idc2

CB C2518T1R0M

CB C2518T1R5M

CB C2518T2R2M

CB C2518T3R3M

CB C2518T4R7M

CB C2518T6R8M

CB C2518T100□

CB C2518T150□

CB C2518T220□

CB C2518T330□

CB C2518T470□

CB C2518T680□

CB C2518T101□

CB C2518T151□

CB C2518T221□

CB C2518T331□

CB C2518T471□

CB C2518T681□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

80

0.08

0.11

0.13

0.16

0.20

0.30

0.36

0.65

0.77

1.5

1000

950

890

730

680

550

480

350

320

270

240

200

160

140

115

100

80

1200

1190

1100

1020

920

740

680

500

460

320

290

200

170

130

110

90

68

7.96

±20%

54

41

38

30

15

23

22

19

2.52

33

15

47

12

1.9

68

9.5

9.0

7.0

5.5

4.5

3.5

3.0

2.8

±10%

±20%

100

150

220

330

470

680

3.7

6.1

8.4

0.796

12.3

22

70

28

65

60

●CBC3225 TYPE

Rated current〔mA〕

EHS

（Environmental

Hazardous

Self-resonant

frequency

〔MHz〕

min.

Resistance

DC

〔Ω（〕±30％）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Temperature rise

current

Ordering code

Saturation current

Idc1

Substances）

Idc2

CB C3225T1R0MR

CB C3225T1R5MR

CB C3225T2R2MR

CB C3225T3R3MR

CB C3225T4R7MR

CB C3225T6R8MR

CB C3225T100□R

CB C3225T150□R

CB C3225T220□R

CB C3225T330□R

CB C3225T470□R

CB C3225T680□R

CB C3225T101□R

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

250

220

190

160

70

50

23

20

17

13

10

8

0.055

0.06

0.08

0.095

0.10

0.12

0.133

0.195

0.27

0.41

0.67

1.0

2000

1250

950

1440

1310

1130

1040

1010

940

±20%

900

0.1

15

730

850

22

620

780

±10%

±20%

33

500

570

47

390

480

68

320

410

100

6

1.4

270

340

●CBL2012 TYPE

Rated current〔mA〕

EHS

（Environmental

Hazardous

Self-resonant

frequency

〔MHz〕

min.

Resistance

DC

〔Ω（〕±30％）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Temperature rise

current

Ordering code

Saturation current

Idc1

Substances）

Idc2

CB L2012T1R0M

CB L2012T2R2M

CB L2012T4R7M

CB L2012T100M

CB L2012T220M

CB L2012T470M

RoHS

1.0

2.2

4.7

10

100

80

45

32

23

11

0.15

0.39

0.66

1.0

620

440

275

205

150

100

950

590

490

370

250

140

±20%

0.1

22

2.1

47

4.2

・□Please specify the Inductance tolerance code（Ｋor Ｍ）

※）The saturation current value（Idc1）is the DC current value having inductance decrease down to 30%.（at 20℃）

※）The temperature rise current value（Idc2）is the DC current value having temperature increase up to 40℃.（at 20℃）

※）The maximum rated current is the DC current value that satisﬁes both of DC saturation current value and temperature rise current value.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound02_e-01

50

■ PART NUMBERS

●CBMF1608 TYPE

Rated current〔mA〕

EHS

（Environmental

Hazardous

Self-resonant

frequency

〔MHz〕

min.

Resistance

DC

〔Ω（〕±30％）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Temperature rise

Ordering code

Saturation current

Idc1

current

Idc2

Substances）

CBMF1608T1R0M

CBMF1608T2R2M

CBMF1608T3R3M

CBMF1608T4R7M

CBMF1608T100□

CBMF1608T220□

CBMF1608T470□

RoHS

1.0

2.2

3.3

4.7

10.0

22

100

80

60

45

32

16

11

0.09

0.17

0.22

0.24

0.36

1.0

290

190

170

145

115

70

770

560

500

470

380

230

140

±20%

7.96

2.52

±10%

±20%

47

2.5

50

・□Please specify the Inductance tolerance code（Ｋor Ｍ）

※）The saturation current value（Idc1）is the DC current value having inductance decrease down to 30%.（at 20℃）

※）The temperature rise current value（Idc2）is the DC current value having temperature increase up to 40℃.（at 20℃）

※）The maximum rated current is the DC current value that satisﬁes both of DC saturation current value and temperature rise current value.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound02_e-01

51

■ ELECTRICAL CHARACTERISTICS

DC Bias characteristicsꢁMeasured by HP4285A＋42841A

■

Low Rdc Type

CB2012

CB2016

CB2518

1000

100

10

1000

100

10

1000

100

10

101□

100□

1R0M

1

0.1

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

DC Bias〔mA〕

High Current Type

CBC2012

CBC2016

CBC2518

CBC3225

100

10

1000

100

10

1000

100

10

470□

101□R

101□

100□

101□

100

10

1

100□

100□R

100□

1R0M

1R0MR

1

1R0M

1

0.1

1

10

100

1000

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

DC Bias〔mA〕

Low Proﬁle Type

Bottom-surface electrode Type

CBL2012

CBMF1608

100

10

1

100

100□

470M

4R7M

10

100M

1R0M

4R7M

1

10

100

1000

1

10

100

1000

DC Bias〔mA〕

Impedance-vs-Frequency characteristicsꢁMeasured by HP4291A

■

Low Rdc Type

CB2012

CB2016

101□

CB2518

100000

10000

100000

10000

100000

10000

101□

100□

1R0M

1000

100

10

1000

100

10

1000

100

10

1

10

100

1000

10000

1000

1

10

100

1000

10000

1

10

100

1000

10000

Frequency〔MHz〕

High Current Type

CBC2012

CBC2016

CBC2518

CBC3225

100000

10000

100000

10000

100000

10000

100000

10000

101□

100□

1R0M

101□R

100□R

101□

470□

100□

1R0MR

1R0M

1000

100

10

1000

100

10

1000

100

10

1000

100

10

1

10

100

1000

1

10

100

1000

10000

1

10

100

1000

10000

1

10

100

1000

10000

Frequency〔MHz〕

Low Proﬁle Type

Bottom-surface electrode Type

CBL2012

CBMF1608

100000

470M

470□

100□

10000

1000

100

10

10000

1000

100

10

100M

4R7M

1

10

100

1

10

100

1000

10000

Frequency〔MHz〕

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound02_e-01

52

(

)

WOUND CHIP INDUCTORS FOR SIGNAL LINE LB/LE SERIES M TYPE

REFLOW

WAVE

REFLOW

L B：

L E：

■ FEATURES

■ APPLICATIONS

◦ꢀLBM2016 Series

◦Dꢀ SC/DVC/HDD, LCD, portable telephones, game equipment.

Various audio-visual equipment, various communication equipment,

etc.

High Q and narrow tolerance are achieved by adopting bottom-sur-

face electrode structure.Wound Chip Inductors that are suitable for

module design of signal line uses.

◦ꢀLEM2520 Series

A high-quality inductor that is simple to mass-produce and conforms

to the same production process and basic construction as an axial

lead type inductor.

■ ORDERING CODE

L B M 2 0 1 6 T 1 0 0 J △

❶

❷

❸

❹

❺

❻

❶Type

Wound chip inductor for

signal line

❷External

❸Packaging

Tape & Reel

❹Nominal

❺

Inductance

Tolerances

❻Internal code

Dimensions〔mm〕

Inductance〔μH〕

T

Standard

Products

LBM

LEM

△

2016

2.0×1.6

2.5×2.0

example

J

±5%

±10%

Wound chip inductor for

signal line

2520

R12

1R0

100

0.12

1.00

10.0

K

△＝Blank space

※R=decimal point

■ EXTERNAL DIMENSIONS/STANDARD QUANTITY

■ AVAILABLE CAPACITANCE RANGE

Type

LBM2016

LEM2520

LBM2016

LEM2520

Range

Idc［mA］

Rdc±30％［Ω］ Idc［mA］

Rdc±30％［Ω］

610

385

215

80

0.13

0.38

1.20

8.00

520

245

155

60

0.37

0.12

1.0

10

1.10

e

3.50

21.00

Standard Quantity [pcs]

100

Type

L

W

T

e

W

100μH

Paper Tape

Embossed Tape

2.0±0.2

1.6±0.2

0.5±0.2

LBM2016

LEM2520

（0.08±0.008）（0.063±0.008）（0.063±0.008）（0.02±0.008）

－

2000

2.5±0.2

2.0±0.2

1.8±0.2

0.45

（0.018）

1.4±0.1

（0.055±0.004）

（0.098±0.008）（0.079±0.008）（0.071±0.008）

Unit：mm（inch）

Recommended Land Patterns

Surface Mounting

・Mounting and soldering conditions should be checked beforehand.

・Applicable soldering process to those products is reﬂow soldering only（. LB only）

・Recommended Land Patterns

C

Unit：mm

TYPE

LBM2016

LEM2520

A

B

C

0.7

0.9

0.8

1.5

1.8

1.5

A

B

A

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound03_e-01

54

■ PART NUMBERS

●LBM2016 TYPE

EHS（Environmental

Self-resonant

frequency

〔MHz〕min.

Resistance

DC

〔Ω（〕±30％）

Rated current

〔mA〕

（max.）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Q

Ordering code

Hazardous

（min.）

Substances

RoHS

）

LB M2016TR12J

LB M2016TR15J

LB M2016TR18J

LB M2016TR22J

LB M2016TR27J

LB M2016TR33J

LB M2016TR39J

LB M2016TR47J

LB M2016TR56J

LB M2016TR68J

LB M2016TR82J

LB M2016T1R0J

LB M2016T1R2J

LB M2016T1R5J

LB M2016T1R8J

LB M2016T2R2J

LB M2016T2R7J

LB M2016T3R3J

LB M2016T3R9J

LB M2016T4R7J

LB M2016T5R6J

LB M2016T6R8J

LB M2016T8R2J

LB M2016T100J

LB M2016T120J

LB M2016T150J

LB M2016T180J

LB M2016T220J

LB M2016T270J

LB M2016T330J

LB M2016T390J

LB M2016T470J

LB M2016T560J

LB M2016T680J

LB M2016T820J

LB M2016T101J

0.12

0.15

0.18

0.22

0.27

0.33

0.39

0.47

0.56

0.68

0.82

1.0

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

8.2

10

600

550

500

450

425

400

375

350

300

270

250

220

180

135

100

75

0.13

0.15

0.20

0.21

0.26

0.29

0.32

0.34

0.38

0.41

0.47

0.48

0.54

0.59

0.68

0.74

0.78

0.88

0.97

1.10

1.20

1.4

610

570

560

520

510

490

440

430

410

400

390

385

370

350

345

340

310

290

275

270

255

240

225

215

200

190

150

140

130

125

120

115

95

25.2

30

55

7.96

48

±5％

43

40

36

33

30

27

12

23

25

15

20

1.5

18

2.5

22

17

2.8

27

16

3.2

2.52

33

15

3.6

39

14

3.9

47

13

4.1

56

20

15

12

5.9

68

11

7.0

90

82

10

7.7

85

100

9.0

8.0

80

0.796

●LEM2520 TYPE

EHS（Environmental

Self-resonant

frequency

〔MHz〕min.

Resistance

DC

〔Ω（〕±30％）

Rated current

〔mA〕

（max.）

Measuring

frequency

〔MHz〕

Inductance

〔μH〕

Inductance

Tolerance

Q

Ordering code

Hazardous

（min.）

Substances

RoHS

）

LEM 2520 TR12K

LEM 2520 TR15K

LEM 2520 TR18K

LEM 2520 TR22K

LEM 2520 TR27K

LEM 2520 TR33K

LEM 2520 TR39K

LEM 2520 TR47K

LEM 2520 TR56K

LEM 2520 TR68K

LEM 2520 TR82K

LEM 2520 T1R0J

LEM 2520 T1R2J

LEM 2520 T1R5J

LEM 2520 T1R8J

LEM 2520 T2R2J

LEM 2520 T2R7J

LEM 2520 T3R3J

LEM 2520 T3R9J

LEM 2520 T4R7J

LEM 2520 T5R6J

LEM 2520 T6R8J

LEM 2520 T8R2J

LEM 2520 T100J

LEM 2520 T120J

LEM 2520 T150J

LEM 2520 T180J

LEM 2520 T220J

LEM 2520 T270J

LEM 2520 T330J

LEM 2520 T390J

LEM 2520 T470J

LEM 2520 T560J

LEM 2520 T680J

LEM 2520 T820J

LEM 2520 T101J

0.12

0.15

0.18

0.22

0.27

0.33

0.39

0.47

0.56

0.68

0.82

1.0

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

8.2

10

600

550

500

450

425

400

375

350

300

270

250

220

180

135

100

75

0.37

0.42

0.46

0.52

0.56

0.60

0.65

0.68

0.75

0.85

1.00

1.10

1.20

1.30

1.45

1.55

1.70

1.90

2.10

2.30

2.50

2.70

3.05

3.50

3.80

4.40

4.80

5.50

6.30

7.10

9.50

11.10

12.10

16.60

19.00

21.00

520

480

460

430

420

400

375

350

325

300

260

245

230

220

210

200

195

185

180

175

170

165

160

155

150

140

130

125

115

110

90

±10％

25.2

30

55

7.96

48

43

40

36

33

30

±5％

27

12

23

25

15

20

18

22

17

27

16

2.52

33

15

39

14

47

13

80

56

20

15

12

75

68

11

70

82

10

65

100

9

60

0.796

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound03_e-01

55

■ ELECTRICAL CHARACTERISTICS

●LBM2016

Q-vs-Frequency characteristics

Impedance-vs-Frequency characteristics

Inductance-vs-Frequency characteristics

■

100

1000

1000000

101J

1R0J

100J

100000

101J

100

1R0J

101J

10000

100J

10

1000

100

10

1R0J

1

0

1

0

1

10

Frequency[MHz]

100

1

10

100

10

100

Freaquency[MHz]

●LEM2520

Q-vs-Frequency characteristics

DC Bias characteristics

Temperature characteristics

■

＋

Measured by HP4285A 42851A

Measured by HP4285A＋42841A

Measured by HP4285A＋42851A

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound03_e-01

56

■ PACKAGING

①Minimum Quantity

Type

④Leader and Blank Portion

Standard Quantity［pcs］

Papar Tape

Embossed Tape

LBC3225/CBC3225

LB3218

ー

1000

2000

LBR2518/LBC2518/LB251

/CB2518/CBC2518/LEM2520

ー

2000

3000

LBM2016/LBC2016/

LB2016/CB2016/CBC2016

LB2012/LBC2012/LBR202

/CB2012/CBC2012

CBL2012

4000

ー

3000

⑤Reel Size

LB1608

LBMF1608/CBMF1608

2.5 max

（0.098）

②Tape material

◦Embossed tape

10.0±1.5

(0.394±0.059)

⑥Top Tape Strength

The top tape requires a peel-off force 0.1 to 0.7N in the direction of the arrow as

illustrated below.

Pull direction

③Taping Dimensions

◦Embossed Tape（0.315 inches wide）

◦Card board carrier tape（0.315 inches wide）

Chip cavity

Insertion pitch

Tape thickness

Type

A

B

F

T

K

1.75±0.1

2.1±0.1

4.0±0.1

0.3±0.05

1.9max.

LBM 2016

LEM 2520

（0.069±0.004）（0.083±0.004）（0.157±0.004）（0.012±0.002）（0.074）

2.3±0.1

2.7±0.1

4.0±0.1

0.3±0.05

2.1±0.1

（0.091±0.004）（0.106±0.004）（0.157±0.004）（0.012±0.002）（0.083±0.004）

LBC3225/

CBC3225

2.8±0.1

3.5±0.1

4.0±0.1

0.3±0.05

4.0max.

（0.110±0.004）（0.138±0.004）（0.157±0.004）（0.012±0.002）（0.157）

2.1±0.1

3.5±0.1

4.0±0.1

0.3±0.05

2.2max.

LB3218

（0.084±0.004）（0.014±0.004）（0.157±0.004）（0.012±0.002）（0.086）

LB2518 / CB2518

LBC2518 / CBC2518

LBR2518

2.15±0.1

2.7±0.1

4.0±0.1

0.3±0.05

2.2max.

（0.085±0.004）（0.107±0.004）（0.157±0.004）（0.012±0.002）（0.086）

LB2016/ CB2016

1.75±0.1

2.1±0.1

4.0±0.1

0.3±0.05

1.9max.

LBC2016 / CBC2016 （0.069±0.004）（0.083±0.004）（0.157±0.004）（0.012±0.002）（0.074）

LB2012 / CB2012

LBC2012 / CBC2012

LBR2012

1.45±0.1

2.25±0.1

4.0±0.1

0.25±0.05 1.45max.

（0.058±0.004）（0.09±0.004）（0.157±0.004）（0.010±0.002）（0.057）

1.55±0.1

2.3±0.1

4.0±0.1

1.1max.

（0.044）

1.1max.

（0.044）

CBL2012

LB1608

（0.061±0.004）（0.091±0.004）（0.157±0.004）（0.044）

1.0±0.1

1.8±0.1

4.0±0.1

1.1max.

（0.059±0.004）（0.072±0.004）（0.157±0.004）（0.044）

LBMF1608 /

CBMF1608

1.1±0.1

1.9±0.1

4.0±0.1

0.25±0.05

1.2max.

（0.04±0.004）（0.076±0.004）（0.157±0.004）（0.010±0.002）（0.047）

Unit：mm（inch）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0103_reli_e-01

wound0103_reli-PRP1

■ RELIABILITY DATA

1.Operating temperature Range

LEM2520

ー40～＋85℃

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

ー25～＋105℃（Including self-generated heat）

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

2.Storage

LEM2520

LB3218

LB2518

LB2016

LB2012

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

ー40～＋85℃

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

3.Rated Current

LEM2520

LB3218

LB2518

LB2016

LB2012

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

LBC2016

LBC2012

CB2012

Within the speciﬁed tolerance

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2518

CBC2016

CBC2012

【Test Methods and Remarks】

LEM Series

The maximum DC value having inductance decrease within 10％ and temperature increase within 20℃ by the application of DC bias.

4.Inductance

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

Within the speciﬁed tolerance

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LEM Series R12～101

Measuring equipment：LCR Mete（r HP4285A＋42851A or its equivalent）

Measuring frequency：Speciﬁed frequency

Measuring equipment：LCR Mate（r HP4285A or its equivalent）

LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF・LBM Series

5.Q

LEM2520

Within the speciﬁed tolerance

LBMF1608

LB3218

LB2518

LB2016

LB2012

LB1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

Within the speciﬁed tolerance

【Test Methods and Remarks】

LEM Series R12～101 Measuring equipment：LCR Meter（HP4285A＋42851A or its equivalent）

Measuring frequency：Speciﬁed frequency

LBM Series

Measuring equipment：LCR Mate（r HP4285A or its equivalent）

6.DC Resisitance

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

LBC2016

LBC2012

CB2012

Within the speciﬁed tolerance

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2518

CBC2016

CBC2012

【Test Methods and Remarks】

LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF SeriesꢀMeasuring equipment：DC Ohmmete（r HIOKI 3227 or its equivalent）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0103_reli_e-01

wound0103_reli-PRP2

■ RELIABILITY DATA

7.Self-Resonant Frequency

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

Within the speciﬁed tolerance

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LEM2520

Measuring equipment：Impedance analyze（r HP4291A or its equivalent）

LB・LBC・LBR・CB・CBC・CBL・LBMF・CBMF Series Measuring equipment：Impedance analyzer（HP4291A or its equivalent）

LBM Series

Measuring equipment：Network analyze（r HP8720B or its equivalent）

8.Temperature Characteristic

LEM2520

Inductance change:Within±5％

Inductance change:Within±15％

LBMF1608・LB3218ꢀInductance change:Within±20％

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225・LBC2518・LBC2016 Inductance change:Within±20％

LBC3225

LBC2518

LBC2016

LBC2012

Inductance change:Within±30％

LBR2518

CB2518

LBR2012

CB2016

Inductance change:Within±15％

CB2012

CBC3225・CBC2518・CBC2016 Inductance change:Within±20％

CBC3225

CBC2518

CBC2016

CBC2012

Inductance change:Within±30％

CBL2012

CBMF1608

LBM2016

Inductance change:Within±15％

Inductance change:Within±20％

Inductance change:Within±5％

【Test Methods and Remarks】

Change of maximum inductance deviation in step 1-5ꢀ

Step

1

2

3

4

5

Temperture（℃）

20

ー25

20（Reference temperature）＋85（Maximum operating temperature）

20

9.Rasistance to Flexure of Substrate

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

No damage.

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

Pressing jig

Warp： 2mm（LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF Series）

3mm（LEM2520）

Test substrate: Printed board

According to JIS C0051

LB・LBMF・

CBMF1608

ꢀ：0.8mm

Others：1.0mm

Board

10.Body Strength

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

No damage.

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LB・LBC・LBR・CB・CBC・CBL・LBM・LEM2520 Applied force：10N

Duration：10sec.

LB1608・LBMF1608・CBMF1608

Applied force：5N

Duration：10sec.

11.Self Resonant Freguency

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

Inductance change : Within－10％

Inductance change : Within－20％

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

Inductance change : Within－30％

Inductance change : Within－10％

【Test Methods and Remarks】

Measure inductance with application of rated current using LCR metre to compare it with the initial value.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0103_reli_e-01

wound0103_reli-PRP3

■ RELIABILITY DATA

12.Adhesion of terminal electrode

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

No abnormality.

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF・LEM2520ꢀApplied force：10N to X and Y directions

Duration：5 sec.

Test substrate：Printed board

LB1608・CBMF1608・LBMF1608

Applied force：5N to X and Y directions

Duration：5 sec.

Test substrate：Printed board

13.Resistance to vibration

LEM2520

Inductance change:Within±5％

No signiﬁcant abnormality in appearance.

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

Inductance change:Within±10％

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

Inductance change:Within±5％

【Test Methods and Remarks】

LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：According to JIS C5102 clause 8.2.

Vibration type：A

Directions：2 hrs each in X, Y and Z directions. Total：6 hrs

Frequency range：10 to 55 to 10 Hz（1min.）

Amplitude：1.5mm

Mounting method：Soldering onto printed board

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

LEM：Recovery

At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

14.Drop test

LEM2520

LB3218

Inductance change:Within±5％

No signiﬁcant abnormality in appearance.

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LEM：

Acceleration：980m/sec2

Duration：6msec

Number of times：6 sides×3 times

Mounting method：Soldering onto printed board

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

LEM：Recovery

At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

15.Solderability

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

At least 90％ of surface of terminal electrode is covered by new

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LEM：

Solder temperature：230±5℃

Duration：5±0.5sec.

Flux：Methanol solution with 25％ of colophony

LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF： Solder temperature：245±5℃

Duration：5±0.5sec

Flux：Methanol solution with 25％ of colophony

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0103_reli_e-01

wound0103_reli-PRP4

■ RELIABILITY DATA

16.Resisitance to soldering heat

LEM2520

No signiﬁcant abnormality in appearance.

LB3218，LB2518，LB2016，LB2012，LB1608

Inductance change:Within±10％ No signiﬁcant abnormality in appearance.

LBMF1608

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

Inductance change:Within±20％ No signiﬁcant abnormality in appearance.

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

LBC2016

LBC2012

CB2012

Inductance change:Within±10％ No signiﬁcant abnormality in appearance.

Inductance change:Within±20％ No signiﬁcant abnormality in appearance.

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2518

CBC2016

CBC2012

Inductance change:Within±5％

No signiﬁcant abnormality in appearance.

【Test Methods and Remarks】

LEM：

Reﬂow condition 3 times of reﬂow over at 220±5℃ for 40sec. MAX, With Peak temperature at 240±5℃ for 5 sec.

MAX.（Refer to a Proﬁle of chart below.）

Flow condition

Solder temperature：260±5℃

Duration：10±1sec. Once

LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：

3 times of reﬂow oven at 230℃ MIN for 40sec. with peak temperature at 260 ℃ for 5sec.

17.Resisitance to solvent

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

No signiﬁcant abnormality in appearance

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

Solvent temperature：Room temperature

Type of solvent：Isopropyl alcohol

ꢀ（LEM2520・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF）

Cleaning conditions：90s. Immersion and cleaning.

ꢀ（LEM2520・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF）

18.Thermal shock

LEM2520

Inductance change :Within±10％

Q→ R12～4R7：30 min.

5R6～330：25 min.

390～820：20 min.

101：15 min.

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

Inductance change:Within±10％

No signiﬁcant abnormality in appearance.

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LEM : Conditions for 1cycle

Step

Temperature（℃） Duration（min）

1

2

ー40

＋85

30

Number of cycle：100 cycle

Recovery：At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：ー40～＋85℃, maintain times 30min. ,100 cycle

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

19.Damp heat

LEM2520

Inductance change :Within±10％

Q→ R12～4R7：30 min.

5R6～330：25 min.

390～820：20 min.

101：15 min.

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

Inductance change:Within±10％

No signiﬁcant abnormality in appearance.

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

Temperature：60±2℃

Humidity：90～95％RH

Duration：1000 hrs

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

LEM：Recovery

At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0103_reli_e-01

wound0103_reli-PRP5

■ RELIABILITY DATA

20.Loading under damp heat

Inductance change :Within±10％

Q→ R12～4R7：30 min.

5R6～330：25 min.

LEM2520

390～820：20 min.

101：15 min.

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

Inductance change:Within±10％

No signiﬁcant abnormality in appearance.

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF：Temperature：60±2℃

Humidity：90～95％RH

Duration：1000 hrs

Applied current：Rated current

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

LEM：Recovery

At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

21.High temperature life test

LEM2520

Inductance change :Within±10％

Q→ R12～4R7：30 min.

5R6～330：25 min.

390～820：20 min.

101：15 min.

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

Inductance change:Within±10％

No signiﬁcant abnormality in appearance.

【Test Methods and Remarks】

LEM・CB・CBC・CBL・LBM・CBMF：Temperature：85±2℃

Duration：1000 hrs

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

LEM：Recovery

At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

22.Loading at high temperature

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

Inductance change:Within±10％

No signiﬁcant abnormality in appearance.

CB2012

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LB・LBC・LBR・LBMF：Temperature：85±2℃

Duration：1000 hrs

Applied current：Rated current

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0103_reli_e-01

wound0103_reli-PRP6

■ RELIABILITY DATA

23.Low temperature life test

Inductance change :Within±10％

Q→ R12～4R7：30 min.

5R6～330：25 min.

LEM2520

390～820：20 min.

101：15 min.

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

CB2012

Inductance change:Within±10％

No signiﬁcant abnormality in appearance.

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

【Test Methods and Remarks】

LEM・LB・LBC・LBR・CB・CBC・CBL・LBM・LBMF・CBMF

Temperature：－40±2℃

Duration：1000 hrs

Recovery：At least 2 hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

LEM：Recovery

At least 1 hr of recovery under the standard condition after the test, followed by the measurement within 2 hrs.

24.Standard condition

LEM2520

LB3218

LB2518

LB2016

LB2012

LB1608

LBMF1608

Standard test conditions

LBC3225

LBR2518

CB2518

LBC2518

LBR2012

CB2016

CBC2518

LBC2016

LBC2012

Unless speciﬁed, Ambient temperature is 20±15℃ and the Relative humidity is 65±

20％. If there is any doubt about the test results, further measurement shall be had

within the following limits:

CB2012

Ambient Temperature: 20±2℃

CBC3225

CBL2012

CBMF1608

LBM2016

CBC2016

CBC2012

Relative humidity: 65±5％

Inductance value is based on our standard measurement systems.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0103_reli_e-01

wound0103_reli-PRP7

■ PRECAUTIONS

LEM Type，LB Type，CB Type

1．Circuit Design

◆Operating environment

1．The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems,

Precautions

measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high

reliability (trafﬁc systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product

failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.

2．PCB Design

◆Land pattern design

Precautions

1．Please contact any of our ofﬁces for a land pattern, and refer to a recommended land pattern of a right ﬁgure or speciﬁcations.

PRECAUTIONS

【Recommended Land Patterns】

Surface Mounting

・Mounting and soldering conditions should be checked beforehand.

・Applicable soldering process to those products is reﬂow soldering only.

・Recommended Land Patterns

Unit : mm

TYPE

1608

A

B

C

1.0

0.9

1.45

1.8

2.0

1.5

2.0

2.7

0.55

0.7

0.8

0.9

1.0

0.7

0.8

1.2

1.5

1.6

MF1608

2012

Technical

consider-

ations

2016

2518

C

LEM2520

3218

3225

A

B

A

3．Considerations for automatic placement

◆Adjustment of mounting machine

Precautions

1. Excessive impact load should not be imposed on the products when mounting onto the PC boards.

2. Mounting and soldering conditions should be checked beforehand.

Technical

consider- 1. When installing products, care should be taken not to apply distortion stress as it may deform the products.

ations

4．Soldering

◆Wave soldering（LEM Type only）

1．For wave soldering,please apply conditions meeting the range of the specifed conditions in our catalog or the relevant speciﬁcations.

◆Reﬂow soldering（LB and CB Types）

1．For reﬂow soldering with either leaded or lead-free solder,the proﬁle speciﬁed in "point for controlling" is recommended.

Precautions ◆Reﬂow soldering（LEM）

1．For reﬂow soldering, please apply conditions meeting the range of the speciﬁed conditions in our catalog or the relevant speciﬁcations.

◆Recommended conditions for using a soldering iron

1．Put the soldering iron on the land-pattern. Soldering iron's temperature-Below 350℃ Duration-3 secons or less. The soldering iron shoud not come in contact

with inductor directly.

◆Wave soldering（LEM Type only）

1．Components can be damaged by excessive heat where soldering conditions exceed the speciﬁed range.

◆Reﬂow soldering（LB and CB Types）

1．Reﬂow proﬁle

300

（LB・CB Type）

Peak Temp: 260＋0/ー5℃

250

200

150

100

50

5 sec Max

Technical

consider-

ations

230℃ Minn

Pre-heat zone

180℃

150℃

30±10 sec

90±30 sec

0

◆Recommended conditions for using a soldering iron

1．Components can be damaged by excessive heat where soldering conditions exceed the speciﬁed range.

5．Cleaning

◆Cleaning conditions

1．LEM Type, LB Type, CB Type

Washing by supersonic waves shall be avoided.

Precautions

Technical ◆Cleaning conditions

consider-

ations

1．LEM Type, LB Type, CB Type

If washing by supersonic waves, supersonic waves may cause broken products.

6．Handling

◆Handling

1．Keep the inductors away from all magnets and magnetic objects.

◆Breakaway PC boards（splitting along perforations）

Precautions

1．When splitting the PC board after mounting inductors, care should be taken not to give any stresses of deﬂection or twisting to the board.

2．Board separation should not be done manually, but by using the appropriate devices.

◆Mechanical considerations

1．Please do not give the inductors any excessive mechanical shocks.

◆Handling

1．There is a case that a characteristic varies with magnetic inﬂuence.

◆Breakaway PC boards（splitting along perforations）

1．Planning pattern conﬁgurations and the position of products should be carefully performed to minimize stress.

◆Mechanical considerations

Technical

consider-

ations

1．There is a case to be damaged by a mechanical shock.

7．Storage conditions

◆Storage

1．To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled.

ꢀ・Recommended conditions

ꢀꢀAmbient temperature：0～40℃ꢀ／ꢀHumidity：Below 70% RH

Precautions

The ambient temperature must be kept below 30℃ Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For

this reason, LE type inductors should be used within one year from the time of delivery.

LB type：Should be used within 6 months from the time of delivery.

LE type：In case of storage over 6 months, solderability shall be checked before actual usage.

Technical ◆Storage

consider-

ations

1．Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of

taping/packaging materials may take place.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0103_reli_e-01

wound0103_reli-PRP8

SMD INDUCTORS LOW PROFILE TYPE

REFLOW

■ FEATURES

■ APPLICATIONS

◦Small and Low proﬁle inductor.

◦For small DC/DC converter

(cellular Phone, HDD, DVC, DSC, PDA, LCD display etc).

◦It corresponds to High current.

◦Simple and original magnetic shield structure.

◦Durable structure against dropping impact.

■ ORDERING CODE

N R △ 4 0 1 8 T △ 1 0 0 M △

❶

❷

❸

❹

❺

❻

❶Type

Coating resin speciﬁcation

❸Packaging

Tape & Reel

❹Nominal inductance

〔μH〕

example

❺Inductance tolerance

❻Internal code

Standard product

NR△, NRG

T△

M

±20%

±30%

△

△＝Blank Space

N

2R2

100

101

2.2

10

❷External dimensions (W×L×H)

example

3010

3012

3015

4010

4012

4018

4026

5040

6012

6020

6028

6045

8040

4.0×4.0×2.6mm

100

3.0×3.0×1.0mm

3.0×3.0×1.2mm

3.0×3.0×1.5mm

4.0×4.0×1.0mm

4.0×4.0×1.2mm

4.0×4.0×1.8mm

5.0×5.0×4.0mm

6.0×6.0×1.2mm

6.0×6.0×2.0mm

6.0×6.0×2.8mm

6.0×6.0×4.5mm

8.0×8.0×4.0mm

※R＝decimal point

■ EXTERNAL DIMENSIONS/STANDARD QUANTITY

ℓ

H

L

H

L

e

W

f

e

Standard

Quantity [pcs]

Tape & Reel

Type

L

W

H

e

f

Type

L

W

H

e

Δe

f

Δℓ

Tape & Reel

^＊3）4.1max

（0.161max）

1.0 max

（0.039 max）

NR3010

NR3012

NR3015

NR4010

NR4012

NR4018

NRG4026

2000

4.9±0.2

ꢀ

1.2±0.2

0.3±0.2

3.3±0.2

1.3±0.3

NR5040

1500

（0.193±0.008）（0.193±0.008） ^＊4）4.0max

（0.047±0.008）（0.011±0.008）（0.130±0.008）（0.051±0.011）

1.2 max

（0.047 max）

3.0±0.1

（0.118±0.004）（0.118±0.004）

3.0±0.1

0.9±0.2

（0.035±0.008）（0.075±0.008）

1.9±0.2

2000

5000

4500

3500

2000

ꢀ

（0.157max）

NR6012

6.0±0.2

1.2 max

1.35±0.2

0.3±0.2

4.0±0.2

1.5 max

（0.059 max）

1000

2500

2000

（E Type）（0.236±0.008）（0.236±0.008）（0.047 max）（0.053±0.008）（0.011±0.008）（0.157±0.008）

6.0±0.2

2.0 max

1.35±0.2

0.3±0.2

4.0±0.2

1.0 max

（0.039 max）

NR6020

NR6028

NR6045

（0.236±0.008）（0.236±0.008）（0.078 max）（0.053±0.008）（0.011±0.008）（0.157±0.008）

2.3±0.3

1.2 max

（0.047 max）

（0.091±0.011）

6.0±0.2

2.8 max

1.35±0.2

0.3±0.2

4.0±0.2

（0.157±

0.008）

4.0±0.2

（0.157±

0.008）

1.1±0.2

（0.043±0.008）（0.098±0.008）

2.5±0.2

（0.236±0.008）（0.236±0.008）（0.110 max）（0.053±0.008）（0.011±0.008）（0.157±0.008）

1.8 max

（0.071 max）

6.0±0.2

4.5 max

1.35±0.2

0.3±0.2

4.0±0.2

1500

（0.236±0.008）（0.236±0.008）（0.177 max）（0.053±0.008）（0.011±0.008）（0.157±0.008）

2.6 max

（0.102 max）

^1）4.2max

*3）1R5～100 Type

*4）150～470 Type

Unit

:

mm (inch)

*

（0.165max）

8.0±0.2

1.6±0.3

5.6±0.3

NR8040

1000

*

^2）4.0max

（0.157max）

（0.315±0.008）（0.315±0.008）

（0.063±0.012）（0.220±0.012）

*1）0R9～6R8 Type

*2）100～101 Type

Unit

:

mm (inch)

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound04_e-01

122

Recommended Land Patterns

【NR3010, NR3012, NR3015】

【NR4010, NR4012, NR4018, NRG4026】

【NR5040】

【NR6012,NR6020,NR6028,NR6045】

【NR8040】

2.2

2.8

3.6

4.7

5.6

2.7

3.7

4.0

5.7

7.5

0.8

1.2

1.5

1.6

1.8

Unit : mm

■ AVAILABLE INDUCTANCE RANGE

Type

NR 3010

NR 3012

NR 3015

NR 4010

NR 4012

NR 4018

NR 5040

NR 6012

NR 6020

NR 6028

NR 6045

NR 8040 NRG 4026

Range

IMAX

[mA]

Rdc±20％ IMAX

Rdc±30％ IMAX

［Ω］ [mA]

Rdc±20％ IMAX

［Ω］ [mA]

3800

Rdc±20％ IMAX

［Ω］ [mA]

Rdc±30％ IMAX

［Ω］ [mA]

Rdc±30％ IMAX

［Ω］ [mA]

Rdc±30％

［Ω］ [mA]

［Ω］

0.020

0.8

1.0

3.3

4600

0.013 4200

0.014 7800

0.006

1300

0.065 1490

0.05 2100

0.030 1050

0.100 1500

0.060 1830

0.030

3600

2300

0.030

0.085

0.020

1730

0.095

500

220

0.450 540

2.05 250

0.290 700

1.45 300

0.230 560

1.34 240

0.380 740

1.81 350

0.240 840

1.00

0.180 2100

900

0.056 1000

0.310

0.235 1400

0.125 1900

0.290

0.065 2500

0.600 700

0.047 3100

0.034 1300

10

47

950

2.18

650

0.300

100

220

320

620

0.500 1000

0.290

170

4.00

■ PART NUMBERS

●NR 3010 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±20％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

1,300

1,200

1,100

870

Idc2

1,400

1,300

1,100

940

NR 3010T 1R0N

NR 3010T 1R5N

NR 3010T 2R2M

NR 3010T 3R3M

NR 3010T 4R7M

NR 3010T 6R8M

NR 3010T 100M

NR 3010T 150M

NR 3010T 220M

NR 3010T 330M

NR 3010T 470M

1.0

1.5

2.2

3.3

4.7

6.8

10

126

98

82

63

56

46

35

30

25

20

17

0.065

0.080

0.095

0.140

0.190

0.300

0.450

0.740

1.03

±30％

750

780

610

630

100

±20％

500

510

15

400

22

350

33

1.55

260

275

47

2.05

220

235

●NR 3012 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±20％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

1,500

1,360

1,100

910

Idc2

1,490

1,400

1,200

1,050

980

NR 3012T 1R0N

NR 3012T 1R5N

NR 3012T 2R2M

NR 3012T 3R3M

NR 3012T 4R7M

NR 3012T 6R8M

NR 3012T 100M

NR 3012T 150M

NR 3012T 220M

NR 3012T 330M

NR 3012T 470M

1.0

1.5

2.2

3.3

4.7

6.8

10

110

92

70

55

48

40

32

27

22

19

17

0.050

0.060

0.080

0.100

0.130

0.190

0.290

0.450

0.630

1.03

±30％

770

670

740

100

±20％

540

630

15

440

485

22

375

420

33

310

330

47

1.45

250

280

●NR 3015 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±20％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

2,100

1,800

1,480

1,210

1,020

870

Idc2

2,100

1,820

1,500

1,230

1,040

880

NR 3015T 1R0N

NR 3015T 1R5N

NR 3015T 2R2M

NR 3015T 3R3M

NR 3015T 4R7M

NR 3015T 6R8M

NR 3015T 100M

NR 3015T 150M

NR 3015T 220M

NR 3015T 330M

NR 3015T 470M

1.0

1.5

2.2

3.3

4.7

6.8

10

100

87

64

49

40

36

28

23

20

18

17

0.030

0.040

0.060

0.080

0.120

0.160

0.230

0.360

0.520

0.840

1.34

±30％

100

±20％

700

710

15

560

22

470

33

390

370

47

320

300

※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)

※）The temperature rise current value（Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)

※）The rated current is the DC current value that satisﬁes both of current value saturation current value and temperature rise current value.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound04_e-01

123

■ PART NUMBERS

●NR 4010 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±20％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

1,800

1,150

1,100

900

Idc2

1,050

890

820

750

620

600

510

NR 4010T 1R0N

NR 4010T 2R2N

NR 4010T 3R3M

NR 4010T 4R7M

NR 4010T 6R8M

NR 4010T 100M

NR 4010T 150M

NR 4010T 220M

NR 4010T 330M

NR 4010T 470M

1.0

2.2

3.3

4.7

6.8

10

116

73

58

47

38

31

24

19

15

13

0.100

0.150

0.180

0.210

0.300

0.380

0.510

0.870

1.54

±30％

740

100

560

±20％

15

470

22

360

400

300

280

33

280

47

1.81

240

●NR 4012 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±20％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

2,500

1,650

1,200

1,050

900

Idc2

1,500

1,200

980

NR 4012T 1R0N

NR 4012T 2R2M

NR 4012T 3R3M

NR 4012T 4R7M

NR 4012T 6R8M

NR 4012T 100M

NR 4012T 150M

NR 4012T 220M

NR 4012T 330M

NR 4012T 470M

1.0

2.2

3.3

4.7

6.8

10

±30％

131

66

50

45

35

28

23

18

15

12

0.060

0.090

0.130

0.140

0.180

0.240

0.400

0.480

0.810

1.00

960

840

100

±20％

740

770

15

560

600

540

22

510

33

400

420

47

350

370

●NR 4018 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±20％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

4,000

2,700

2,000

1,700

1,450

1,200

940

Idc2

1,830

1,440

1,230

1,200

1,060

840

NR 4018T 1R0N

NR 4018T 2R2M

NR 4018T 3R3M

NR 4018T 4R7M

NR 4018T 6R8M

NR 4018T 100M

NR 4018T 150M

NR 4018T 220M

NR 4018T 330M

NR 4018T 470M

NR 4018T 680M

NR 4018T 101M

NR 4018T 151M

NR 4018T 221M

1.0

2.2

3.3

4.7

6.8

10

±30％

80

52

44

34

29

24

0.030

0.060

0.070

0.090

0.110

0.180

0.250

0.360

0.530

0.650

1.00

15

19

650

100

22

±20％

16

800

590

33

12

650

490

47

10

570

420

68

8.3

6.5

5.5

4.0

470

320

100

150

220

1.50

400

270

2.50

310

220

4.00

270

170

●NR 5040 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±30％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

Idc2

3,600

3,500

3,300

3,100

2,300

2,100

1,800

1,400

1,200

900

NR 5040T 1R5N

NR 5040T 2R2N

NR 5040T 3R3N

NR 5040T 4R7N

NR 5040T 6R8M

NR 5040T 100M

NR 5040T 150M

NR 5040T 220M

NR 5040T 330M

NR 5040T 470M

1.5

2.2

3.3

4.7

6.8

10

60

42

32

28

21

18

13

9

0.020

0.022

0.027

0.029

0.049

0.056

0.080

0.126

0.180

0.310

6,000

4,600

3,800

3,300

2,600

2,300

2,000

1,600

1,300

1,100

±30％

100

15

±20％

22

33

7

47

6

●NR 6012 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±20％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

2,100

1,800

1,500

1,300

1,000

800

Idc2

1,730

1,570

1,400

1,180

1,000

790

NR 6012T 2R5NE

NR 6012T 4R0NE

NR 6012T 5R3ME

NR 6012T 6R8ME

NR 6012T 100ME

NR 6012T 150ME

NR 6012T 220ME

NR 6012T 330ME

NR 6012T 470ME

NR 6012T 680ME

NR 6012T 101ME

2.5

4.0

5.3

6.8

10

45

39

34

30

22

18

12

8

0.090

0.105

0.125

0.165

0.235

0.330

0.530

0.700

1.05

±30％

15

100

22

±20％

760

630

33

590

530

47

6

520

460

68

3

1.35

440

410

100

1

2.18

350

320

※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)

※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)

※）The rated current is the DC current value that satisﬁes both of current value saturation current value and temperature rise current value.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound04_e-01

124

■ PART NUMBERS

●NR 6020 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±20％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

Idc2

3,800

3,200

2,700

2,600

2,000

1,800

1,400

950

NR 6020T 0R8N

NR 6020T 1R5N

NR 6020T 2R2N

NR 6020T 3R3N

NR 6020T 4R7N

NR 6020T 6R8N

NR 6020T 100M

NR 6020T 220M

0.8

1.5

2.2

3.3

4.7

6.8

10

110

93

73

55

43

30

18

11

0.020

0.026

0.034

0.040

0.058

0.085

0.125

0.290

5,500

4,000

3,200

2,800

2,400

2,000

1,700

1,050

±30％

100

±20％

22

●NR 6028 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±30％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

6,600

5,000

4,200

3,600

2,700

2,500

1,900

1,600

1,300

1,100

950

Idc2

4,600

4,200

3,700

3,400

3,000

2,500

1,900

1,800

1,400

1,100

920

NR 6028T 0R9N

NR 6028T 1R5N

NR 6028T 2R2N

NR 6028T 3R0N

NR 6028T 4R7M

NR 6028T 6R0M

NR 6028T 100M

NR 6028T 150M

NR 6028T 220M

NR 6028T 330M

NR 6028T 470M

NR 6028T 680M

NR 6028T 101M

0.9

1.5

2.2

3.0

4.7

6.0

10

90

78

68

55

39

30

20

17

12

10

8

0.013

0.016

0.020

0.023

0.031

0.040

0.065

0.095

0.135

0.220

0.300

0.420

0.600

±30％

100

15

22

±20％

33

47

68

5

760

770

100

3

620

660

●NR 6045 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±30％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

8,500

8,000

7,000

6,000

5,000

4,000

3,800

3,000

2,300

1,900

1,500

1,300

1,000

800

Idc2

4,200

4,000

3,700

3,500

3,200

3,000

2,800

2,500

1,900

1,500

1,400

1,100

900

NR 6045T 1R0N

NR 6045T 1R3N

NR 6045T 1R8N

NR 6045T 2R3N

NR 6045T 3R0N

NR 6045T 4R5M

NR 6045T 6R3M

NR 6045T 100M

NR 6045T 150M

NR 6045T 220M

NR 6045T 330M

NR 6045T 470M

NR 6045T 680M

NR 6045T 101M

1.0

1.3

1.8

2.3

3.0

4.5

6.3

10

110

95

80

60

45

25

15

12

10

7

0.014

0.016

0.018

0.021

0.024

0.031

0.038

0.047

0.077

0.115

0.145

0.220

0.330

0.500

±30％

100

15

22

±20％

33

6

47

5

68

4

100

3

700

●NR 8040 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance Inductance

DC Resistance

[Ω] (±30％)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

11,000

9,000

7,400

5,300

4,700

4,000

3,400

2,700

2,200

1,900

1,500

1,200

1,000

Idc2

7,800

7,000

6,300

4,900

4,100

3,700

3,100

2,400

2,200

1,700

1,400

1,100

1,000

NR 8040T 0R9N

NR 8040T 1R4N

NR 8040T 2R0N

NR 8040T 3R6N

NR 8040T 4R7N

NR 8040T 6R8N

NR 8040T 100M

NR 8040T 150M

NR 8040T 220M

NR 8040T 330M

NR 8040T 470M

NR 8040T 680M

NR 8040T 101M

0.9

1.4

2.0

3.6

4.7

6.8

10

85

63

50

34

30

24

22

16

13

12

8

0.006

0.007

0.009

0.015

0.018

0.025

0.034

0.050

0.066

0.100

0.150

0.230

0.290

±30％

100

15

22

33

±20％

47

68

7

100

6

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound04_e-01

125

■ PART NUMBERS

●NRG 4026 Shielded type

Rated current ※）〔mA〕

Saturation current Temperature rise current

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance

[μH]

Inductance

Tolerance

DC Resistance

[Ω] (±30%)

Ordering code

Idc1

3,100

2,100

1,800

1,450

1,300

1,000

900

Idc2

2,300

1,970

1,700

1,600

1,500

1,300

1,100

900

NRG4026 T 1R2N

NRG4026 T 2R3N

NRG4026 T 3R5M

NRG4026 T 4R7M

NRG4026 T 6R6M

NRG4026 T 100M

NRG4026 T 150M

NRG4026 T 220M

NRG4026 T 330M

NRG4026 T 470M

1.2

2.3

3.5

4.7

6.6

10

120

96

58

46

33

26

19

13

9

0.030

0.040

0.050

0.055

0.065

0.085

0.110

0.165

0.200

0.300

±30％

100

±20％

15

22

610

33

540

800

47

6

410

650

※）The saturation current (Idc1) is DC current value Inductance decrease down to 30%. (at 20℃)

※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)

※）The rated current is Idc2.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound04_e-01

126

■ ELECTRICAL CHARACTERISTICS

DC Bias characteristics

■

（Measured by HP4285A）

NR 3010

NR 3012

NR 3015

NR 4010

100

10

1

100

10

1

100

470M

220M

470M

220M

100M

470M

220M

100M

220M

100M

10

100M

4R7M

2R2M

4R7M

2R2M

4R7M

2R2N

2R2M

1

10

1

10

100

1,000

10,000

10

100

1,000

10,000

100

1,000

10,000

100

1,000

10,000

DC Bia〔s mA〕

NR 4012

NR 4018

NR 6012（E Type）

NR 5040

100

1000

100

10

1000

100

470M

220M

470M

221M

100

101M

470M

220M

100M

470M

220M

10

100M

10

100M

5R3M

100M

4R7M

4R7N

2R2N

4R7M

2R2M

1

10

1

10

100

1,000

10,000

10

100

1,000

10,000

10

100

1,000

10,000

100

1,000

10,000

DC Bia〔s mA〕

NR 6045

NR 8040

NR 6020

NR 6028

100

10

1000

100

10

1000

100

10

1000

100

10

220M

100M

101M

470M

220M

101M

470M

220M

470M

220M

100M

4R7M

2R2M

100M

4R5N

100M

4R7N

4R7

1

2R3N

1R0N

2R0N

0R9N

2R2

0R9

0R8N

1

0.1

10

0.1

10

100

1,000

10,000

10

100

1,000

100

1,000

10,000

100,000

100

1,000

10,000

100,000

DC Bia〔s mA〕

NRG 4026

100

470M

220M

100M

10

4R7M

2R3N

1

10

100

1,000

DC Bia〔s mA〕

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound04_e-01

127

SMD INDUCTORS SMALL AND LARGE CURRENT TYPE

REFLOW

■ FEATURES

■ APPLICATIONS

◦Small and Low proﬁle inductor.

◦For small DC/DC converter

(cellular Phone, HDD, DVC, DSC, PDA, LCD display etc).

◦It corresponds to High current.

◦Simple and original magnetic shield structure.

◦Durable structure against dropping impact.

■ ORDERING CODE

N R H 2 4 1 0 T △ 1 0 0 M ○ ○ ○

❶

❷

❸

❹

❺

❻

❶Type

❷External dimensions

（W×L×H）

example

❸Packaging

Tape & Reel

❹Nominal inductance

〔μH〕

example

❺Inductance tolerance

❻Internal code

○○○ Standard products

○＝Blank Space

NRH

T△

M

±20%

±30%

NRS Coating resin speciﬁcation

NRV

△＝Blank Space

N

2410

3010

3012

5012

5014

5020

6010

2.4×2.4×1.0mm

3.0×3.0×1.0mm

3.0×3.0×1.2mm

5.0×5.0×1.2mm

5.0×5.0×1.4mm

5.0×5.0×2.0mm

6.0×6.0×1.0mm

2R2

100

101

2.2

10

100

※R＝decimal point

■ EXTERNAL DIMENSIONS/STANDARD QUANTITY

Δℓ

H

L

H

L

Δe

e

W

f

W

e

Δe

Standard

Quantity [pcs]

Tape & Reel

Standard

Quantity [pcs]

Tape & Reel

Type

L

W

H

e

f

Type

L

W

H

e

Δe

f

Δℓ

2.4±0.1

1.0 max

0.6±0.2

1.45±0.2

1.2 max

NRH2410

NRH3010

2500

2000

NRS5012

NRS5014

NRS5020

NRS6010

1000

800

（0.047 max）

（0.095±0.004）（0.095±0.004）（0.039 max）（0.024±0.008）（0.057±0.008）

4.9±0.2

1.4 max

1.2±0.2

0.3±0.2

3.3±0.2

1.3±0.3

1.0 max

（0.039 max）

（0.193±0.008）（0.193±0.008）（0.055 max）（0.047±0.008）（0.011±0.008）（0.130±0.008）（0.051±0.011）

3.0±0.1

0.9±0.2

1.9±0.2

2.0 max

（0.079 max）

1.0 max

（0.118±0.004）（0.118±0.004）

（0.035±0.008）（0.075±0.008）

NRH3012

NRV3012

1.2 max

（0.047 max）

2000

6.0±0.2

1.35±0.2

0.3±0.2

4.0±0.2

2.3±0.3

Unit：mm（inch）

1000

（0.236±0.008）（0.236±0.008）（0.039 max）（0.053±0.008）（0.011±0.008）（0.157±0.008）（0.091±0.011）

Recommended Land Patterns

Unit：mm（inch）

【NRH2410】

【NR3010, NRH3012, NRV3012】

【NRS5012, NRS5014, NRS5020】

【NRS6010】

1.45

2.2

3.6

4.7

2.0

2.7

4.0

5.7

0.7

0.8

1.5

1.6

■ AVAILABLE INDUCTANCE RANGE

Type

NRH2410

NRH3010

NRH3012

NRV3012

NRS5012

NRS5014

NRS5020

NRS6010

Range

Imax

[mA]

Rdc±20％ Imax

［Ω］[mA]

Rdc±20％ Imax

［Ω］[mA]

Rdc±20％ Imax

Rdc±20％

［Ω］[mA]

［Ω］

1.0

2.2

4.7

1410

0.070 1480

0.065 1710

0.048

2300

0.053

2800

3600

0.021

1900

0.045

0.090

0.270

1100

0.120

850

1800

0.100

1300

450

300

0.690 600

1.47 380

0.350 720

0.770

0.270

0.420

0.120 1000

0.260

10

22

900

500

0.630

100

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound05_e-01

128

■ PART NUMBERS

●NRH 2410 Shielded type

Rated current ※）〔mA〕

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance

[μH]

Inductance

Tolerance

DC Resistance

[Ω] (±20%)

Saturation

current

Idc1

Temperature rise

current

Ordering code

Substances

)

Idc2

NRH2410T R68NN 4

NRH2410T 1R0NN 4

NRH2410T 1R5MN

NRH2410T 2R2MN

NRH2410T 3R3MN

NRH2410T 4R7MN

NRH2410T 6R8MN

NRH2410T 100MN

NRH2410T 150MN

NRH2410T 220MN

RoHS

0.68

1.0

1.5

2.2

3.3

4.7

6.8

10

120

106

94

77

56

50

43

32

27

0.060

0.070

0.110

0.150

0.220

0.290

0.410

0.690

1.02

2,200

1,800

1,550

1,290

1,000

880

1,570

1,410

1,160

970

±30％

770

100

670

±20％

750

570

550

450

15

470

370

22

1.47

390

300

●NRH 3010 Type

Rated current ※）〔mA〕

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance

[μH]

Inductance

Tolerance

DC Resistance

[Ω] (±20%)

Saturation

current

Idc1

Temperature rise

current

Ordering code

Substances

)

Idc2

NRH3010T 1R2N

NRH3010T 1R5N

NRH3010T 2R2M

NRH3010T 3R3M

NRH3010T 4R7M

NRH3010T 6R8M

NRH3010T 100M

NRH3010T 150M

NRH3010T 220M

RoHS

1.2

1.5

2.2

3.3

4.7

6.8

10

120

99

86

64

50

44

34

25

22

0.065

0.075

0.083

0.130

0.170

0.250

0.350

0.550

0.770

1,700

1,440

1,300

1,000

850

1,480

1,370

1,300

1,030

900

±30％

100

±20％

700

745

600

620

15

450

480

22

380

410

●NRH 3012 Type

Rated current ※）〔mA〕

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance

[μH]

Inductance

Tolerance

DC Resistance

[Ω] (±20％)

Saturation

current

Idc1

Temperature rise

current

Ordering code

Substances

)

Idc2

NRH3012T 1R0N

NRH3012T 1R5N

NRH3012T 2R2M

NRH3012T 3R3M

NRH3012T 4R7M

NRH3012T 6R8M

NRH3012T 100M

NRH3012T 150M

NRH3012T 220M

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

111

95

78

61

50

43

32

26

22

0.048

0.055

0.075

0.100

0.130

0.190

0.270

0.450

0.630

2,200

1,700

1,500

1,200

1,000

850

1,710

1,600

1,370

1,210

1,060

890

±30％

100

±20％

730

720

15

530

570

22

500

●NRV 3012 Type

Rated current ※）〔mA〕

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance

[μH]

Inductance

Tolerance

DC Resistance

[Ω] (±20％)

Saturation

current

Idc1

Temperature rise

current

Ordering code

Substances

)

Idc2

NRV3012T 2R2M

RoHS

2.2

±20％

70

0.120

1,800

1,100

100

●NRS 5012 Type

Rated current ※）〔mA〕

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance

[μH]

Inductance

Tolerance

DC Resistance

[Ω] (±20％)

Saturation

current

Idc1

Temperature rise

current

Ordering code

Substances

)

Idc2

NRS5012T 1R0N

NRS5012T 1R5N

NRS5012T 2R2M

NRS5012T 3R3M

NRS5012T 4R7M

NRS5012T 6R8M

NRS5012T 100M

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

100

86

70

48

40

36

26

0.053

0.070

0.085

0.160

0.180

0.260

0.420

4,500

3,800

3,100

2,400

2,200

1,700

1,400

2,300

2,200

2,000

1,450

1,400

1,100

850

±30％

±20％

100

●NRS 5014 Type

Rated current ※）〔mA〕

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance

[μH]

Inductance

Tolerance

DC Resistance

[Ω] (±20％)

Saturation

current

Idc1

Temperature rise

current

Ordering code

Substances

)

Idc2

NRS5014T 1R2N

NRS5014T 2R2N

NRS5014T 3R3N

NRS5014T 4R7N

RoHS

1.2

2.2

3.3

4.7

86

56

48

41

0.045

0.065

0.080

0.100

3,800

2,800

2,350

2,050

2,800

2,300

2,100

1,800

±30％

100

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound05_e-01

129

■ PART NUMBERS

●NRS 5020 Type

Rated current ※）〔mA〕

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance

[μH]

Inductance

Tolerance

DC Resistance

[Ω] (±20％)

Saturation

current

Idc1

Temperature rise

current

Ordering code

Substances

)

Idc2

NRS5020T 1R0N

NRS5020T 1R5N

NRS5020T 2R2N

NRS5020T 3R3N

NRS5020T 4R7M

NRS5020T 6R8M

NRS5020T 100M

NRS5020T 150M

NRS5020T 220M

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

81

68

57

46

37

30

24

20

17

0.021

0.026

0.035

0.048

0.060

0.090

0.120

0.165

0.260

4,000

3,350

2,900

2,400

2,000

1,600

1,300

1,100

900

3,600

3,200

2,900

2,400

2,000

1,650

1,450

1,200

1,000

±30％

±20％

100

15

22

●NRS 6010 Type

Rated current ※）〔mA〕

EHS (Environmental

Hazardous

Self-resonant

frequency

〔MHz〕(min.)

Measuring

frequency

〔kHz〕

Inductance

[μH]

Inductance

Tolerance

DC Resistance

[Ω] (±20％)

Saturation

current

Idc1

Temperature rise

current

Ordering code

Substances

)

Idc2

NRS6010T 1R5N

NRS6010T 2R2N

NRS6010T 3R3N

NRS6010T 4R7N

NRS6010T 6R8N

NRS6010T 100M

RoHS

1.5

2.2

3.3

4.7

6.8

10

90

65

50

38

30

25

0.090

0.110

0.135

0.165

0.220

0.270

2,400

1,900

1,600

1,300

1,200

1,000

1,900

1,700

1,500

1,400

1,200

1,100

±30％

±20％

100

※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)

※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)

※）The rated current is the DC current value that satisﬁes both of current value saturation current value and temperature rise current value.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound05_e-01

130

■ ELECTRICAL CHARACTERISTICS

DC Bias characteristics

■

（Measured by HP4285A）

NRH 2410

NRH 3010

NRH 3012

NRV 3012

100

220M

100M

220M

10

100M

4R7M

100M

4R7M

2R2M

1R0N

2R2M

1R0N

2R2M

1

0.1

10

100

1,000

10,000

10

100

1,000

10,000

10

100

1,000

10,000

10

100

1,000

10,000

DC Bia〔s mA〕

NRS 5012

NRS 5014

NRS 5020

NRS 6010

100

200M

100M

4R7M

10

100M

4R7M

2R2M

4R7M

1R2N

2R2N

1R0N

2R2N

1

1R0N

0.1

10

100

1,000

10,000

10

100

1,000

10,000

10

100

1,000

10,000

10

100

1,000

10,000

DC Bia〔s mA〕

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound05_e-01

131

■ PACKAGING

①Minimum Quantity

Type

Chip cavity

Insertion pitch

F

Tape thickness

Type

A

B

T

K

Standard Quantity [pcs]

Tape ＆ Reel

2500

2000

5000

4500

3500

2000

1000

800

1.4±0.1

（0.055±0.004）

NR 4010

NR 4012

NR 4018

NRG 4026

NRH 2410

NR 3010/NRH 3010

NR 3012/NRH3012/NRV3012

NR 3015

1.6±0.1

（0.063±0.004）

4.3±0.1

（0.169±0.004）（0.169±0.004）

2.1±0.1

（0.083±0.004）

NR 4010

0.3±0.05

3.1±0.1

NR 4012

（0.012±0.002）

（0.122±0.004）

NR 4018

1.4±0.1

（0.055±0.004）

1.6±0.1

（0.063±0.004）

2.3±0.1

（0.091±0.004）

4.2±0.1

（0.165±0.004）

NRG4026

NRS5012

NRS 5012

NRS 5014

NRS 5020

NR 5040

NRS 6010

5.25±0.1

NRS5014

（0.207±0.004）（0.207±0.004）

NRS5020

8.0±0.1

（0.315±0.004）

NR 5040

1500

1000

2500

2000

1500

1000

5.15±0.1

NRS6010

（0.203±0.004）（0.203±0.004）

NR 6012

1.4±0.1

（0.055±0.004）

1.6±0.1

NR 6020

NR 6028

NR 6012

NR 6020

NR 6028

NR 6045

（0.063±0.004）

0.4±0.1

（0.016±0.004）

NR 8040

2.3±0.1

（0.090±0.004）

6.3±0.1

（0.248±0.004）（0.248±0.004）

3.1±0.1

（0.122±0.004）

②Tape Material

4.7±0.1

（0.185±0.004）

Unit : mm (inch)

◦Embossed tape 16mm wide (0.63 inches wide)

2.0±0.1

（0.079±0.004）

4.0±0.1

（0.157±0.004）

K

CHIP cavity

F

φ1.5±0.1

（0.059±0.004）

1.75±0.1

（0.069±0.004）

T

7.5±0.1

（0.295±0.004）

A

Electrode（bottom view）

③Taping dimensions

Chip cavity

Insertion pitch

F

Tape thickness

◦Embossed tape 8mm wide (0.315 inches wide)

Type

A

B

T

K

＋0.1

ー0

CHIP cavity

φ1.5

1.75±0.1

（0.069±0.004）

8.3±0.1

12.0±0.1

0.5±0.1

4.5±0.1

K

＋0.004

ー0

NR 8040

（0.059

）

(0.327±0.004) (0.327±0.004) (0.472±0.004) (0.020±0.004) (0.177±0.004)

T

Unit : mm (inch)

A

④Leader and Blank portion

◦NR, NRH, NRS, NRG, NRV

Blank portions

Chip cavity

Blank portions

Leader

Electrode（bottom view）

F

2.0±0.05

4.0±0.1

（0.079±0.002）（0.157±0.004）

Chip cavity

Insertion pitch

F

Tape thickness

Type

A

B

T

K

160mm or more

(6.3 inches or more)

100mm or more

(3.94 inches or more)

2.6±0.1

0.25±0.05

1.3±0.1

NRH 2410

（0.102±0.004）（0.102±0.004）

（0.009±0.002）（0.051±0.004）

NR 3010

NRH 3010

1.4±0.1

400mm or more

(15.8 inches or more)

（0.055±0.004）

4.0±0.1

NR 3012

NRH 3012

NRV3012

（0.157±0.004）

（0.126±0.004）（0.126±0.004）

Direction of tape feed

3.2±0.1

0.3±0.05

1.6±0.1

（0.012±0.002）（0.063±0.004）

1.9±0.1

（0.075±0.004）

NR 3015

Unit : mm (inch)

◦Embossed tape 12mm wide (0.47 inches wide)

＋0.1

ー0

CHIP cavity

φ1.5

1.75±0.1

K

＋0.004

ー0

（0.059

）

（0.069±0.004）

T

A

Electrode（bottom view）

F

2.0±0.1

4.0±0.1

（0.079±0.004）（0.157±0.004）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0405_pack_e-01

wound0405_pack-P1

■ PACKAGING

⑤Reel size

W

2±0.5

φ13±0.5

2.5 or less

（0.098inches

or less）

Reel size (Reference values)

Type

φD

φd

W

NRH2410

NR 3010

NRH 3010

180±0.5

（7.087±0.019）

60±1.0

（2.36±0.04）

10.0±1.5

（0.394±0.059）

NR 3012

NRH 3012

NRV 3012

NR 3015

NRS 5012

NRS 5014

NRS 5020

NRS 6010

NR 6012

180±3.0

（7.087±0.118）

60±2.0

（2.36±0.08）

14.0±1.5

（0.551±0.059）

Unit : mm (inch)

W

2±0.5

φ13±0.5

t

Reel size (Reference values)

Type

φD

φd

t (max.)

W

NR 4010

NR 4012

NR 4018

NRG 4026

NR 5040

NR 6020

NR 6028

NR 6045

18.5

（0.72）

13.5±1.0

（0.531±0.04）

330±3.0

80±2.0

（12.99±0.118）（3.15±0.078）

22.5

（0.89）

17.5±1.0

（0.689±0.04）

NR 8040

Unit : mm (inch)

⑥Top Tape Strength

The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as

illustrated below.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0405_pack_e-01

wound0405_pack-P2

SMD INDUCTORS LARGE CURRENT TYPE

■ FEATURES

■ APPLICATIONS

◦SMD inductor.

◦

Power supply circuits / DC-DC converters in a variety of applications such

as PDP TV, LCD TV, HDD, PC, etc.

◦It corresponds to High current.

◦Simple and original magnetic shield structure.

■ ORDERING CODE

N R △ 1 0 0 5 0 T △ 1 0 0 M △

❶

❷

❸

❹

❺

❻

❶Type

❷External dimensions

(W×H)

example

❸Packaging

Tape & Reel

❹Nominal inductance

〔μH〕

example

❺Inductance tolerance

❻Internal code

Standard product

NR△ Coating resin speciﬁcation

△＝Blank Space

T△

M

±20%

±30%

△

△＝Blank Space

N

10050

10.0×5.0mm

1R3

1.3

100

10

101

100

※R＝decimal point

■ EXTERNAL DIMENSIONS/STANDARD QUANTITY

■ AVAILABLE INDUCTANCE RANGE

Recommended Land Patterns

Surface Mounting

Type

NR 10050

Range

・Mounting and soldering conditions should be checked

beforehand.

Imax [A]

Rdc±30％ [mΩ]

a

L

・Applicable soldering process to these products is reﬂow

soldering only.

1.0

10

9

6.8

25

W

b

4.5

4.1

H

2.6

5.4

2.6

Unit : mm

1.2

0.8

209

450

Standard

100

220

Quantity [pcs]

Type

L

W

H

a

b

Tape & Reel

10.0±0.3

9.8±0.5

5.0 max

4.0

（0.16）

1.75

（0.07）

NR 10050

500

（0.394±0.012）（0.386±0.020） (0.197 max)

Unit : mm (inch)

■ PART NUMBERS

●NR 10050 type

Rated current ※）[mA]

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

[MHz] (min.)

Measuring

frequency

[kHz]

Inductance Inductance

DC Resistance

[Ω] (±30%)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

11000

10000

8200

7300

6600

6000

4700

3600

2600

2500

2000

1700

1300

1000

Idc2

9000

8300

7300

6800

6000

5200

4100

3200

2500

2100

1800

1500

1200

800

NR10050T1R3N

NR10050T2R1N

NR10050T2R9N

NR10050T3R8N

NR10050T4R9N

NR10050T6R5N

NR10050T100M

NR10050T150M

NR10050T220M

NR10050T330M

NR10050T470M

NR10050T680M

NR10050T101M

NR10050T221M

1.3

2.1

2.9

3.8

4.9

6.5

10

53

37

0.0068

0.008

0.0093

0.013

0.015

0.018

0.025

0.035

0.045

0.066

0.092

0.144

0.209

0.450

29

26

23

19

±30％

15

100

15

11

22

10

33

8.2

7.0

5.6

4.6

3.0

±20％

47

68

100

220

※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)

※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)

※）The maximum rated current is the DC current value that satisﬁes both of current value Saturation current value and temperature rise current value. (at 20℃)

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound06_e-01

132

■ ELECTRICAL CHARACTERISTICS

DC Bias characteristics

■

（Measured by HP4285A）

NR 10050

1000.0

221M

100.0

101M

680M

470M

330M

220M

150M

10.0

100M

6R5N

4R9N

3R8N

2R9N

2R1N

1.0

1R3N

0.1

1.0

10.0

100.0

DC Bia〔s A〕

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound06_e-01

133

■ PACKAGING

①Minimum Quantity

⑥Top Tape Strength

Standard Quantity [pcs]

Tape & Reel

The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as

illustrated below.

Type

NR 10050

500

②Tape Material

③Taping dimensions

◦Embossed tape 24mm wide (0.945 inches wide)

2.0±0.1

16.0±0.1

（0.079±0.004）

（0.63±0.004）

4.0±0.1

（0.157±0.004）

＋0.1

φ1.5

ー0

＋0.004

ー0

1.75±0.1

（0.069±0.004）

F

K

T

（0.059

）

B

＋0.3

24.0ꢀꢀ

11.5±0.1

（0.453±0.004）

ー0.1

＋0.012

A

（0.945_ー0.004

）

Chip cavity

Insertion pitch

F

Tape thickness

Type

NR 10050

A

B

T

K

10.4±0.1

9.9±0.1

16.0±0.1

0.5±0.05

5.7±0.1

(0.409±0.004) (0.390±0.004) (0.630±0.004) (0.020±0.002) (0.224±0.004)

Unit : mm (inch)

④Leader and Blank portion

Chip cavity

Cover Tape Blank portions

Blank portions

40 to 50 pockets

Leader

100 to 200mm 20 to 30 pockets

1role of reel

（3.94 to 7.87

inches）

Direction of tape feed

⑤Reel size

25.5±1.0

（1.004±0.04）

2±0.5

（0.079±0.020）

φ13±0.5

（φ0.512±0.020）

t

Reel size (Reference values)

Type

NR 10050

φD

330±3

(12.99±0.118)

φd

80±2

(3.15±0.078)

t (max.)

30.5

(1.201)

Unit : mm (inch)

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound06_pack_e-01

wound06_pack-P1

SMD INDUCTORS COMPACT TYPE

REFLOW

■ FEATURES

■ APPLICATIONS

◦BR C2518/BRFL2518 (NEW PRODUCTS)

◦For small DC/DC converter

(cellular phone, HDD, DVC, DSC, PDA, LCD display etc).

The best efﬁciency design is achieved by adopting bottom-surface elec-

trode structure.Small and low-proﬁle Wound Chip Inductors that are suitable

for module design which needs high electric current like DC/DC converters.

■ ORDERING CODE

B R △ 2 5 1 8 T 2 R 2 M △ △ △

❶

❷

❸

❹

❺

❻

❼

❶Type

BR SMD Inductors

❷Characteristic Spec

❸External Dimensions

(W×L) : mm (inch)

❹Packaging

Tape & Reel

❺Nominal Inductance

〔μH〕

example

❻Inductance tolerance

△

L

T

M

±20%

±10%

Low Rdc

Low proﬁle

1608 (0603)

1.6×0.8mm

2.0×1.2mm

2.0×1.6mm

2.5×1.8mm

3.2×2.5mm

K

2012 (0805)

2016 (0806)

2518 (1007)

3225 (1210)

R20

1R0

2R2

4R7

0.2

1.0

2.2

4.7

C

High Current

FL Low proﬁle

❼Internal code

△△△ Standard product

△＝Blank Space

※R＝decimal point

■ EXTERNAL DIMENSIONS/STANDARD QUANTITY

Standard Quantity [pcs]

L

W

Type

L

W

H

e

Paper Tape

Embossed Tape

1.6±0.2

0.8±0.2

0.45±0.15

BR C1608

BR L2012

BR C2016

BR C2518

BR L2518

BRFL2518

BR L3225

ー

3000

H

（0.063±0.008）（0.031±0.008）（0.031±0.008）（0.016±0.006）

2.0±0.2

1.25±0.2

1.0 max.

0.5±0.2

ー

3000

2000

3000

e

（0.078±0.008）（0.049±0.008）（0.040 max.）（0.020±0.008）

2.0±0.2 1.6±0.2 1.6±0.2 0.5±0.2

（0.078±0.008）（0.063±0.008）（0.063±0.008）（0.020±0.008）

2.5±0.2 1.8±0.2 1.8±0.2 0.5±0.2

（0.098±0.008）（0.071±0.008）（0.071±0.008）（0.020±0.008）

2.5±0.2 1.8±0.2 1.2 max. 0.5±0.2

（0.098±0.008）（0.071±0.008）（0.048 max.）（0.020±0.008）

2.5±0.2 1.8±0.2 1.0 max. 0.5±0.2

（0.098±0.008）（0.071±0.008）（0.040 max.）（0.020±0.008）

3.2±0.2 2.5±0.2 1.7 max. 0.75±0.2

（0.126±0.008）（0.098±0.008）（0.068 max.）（0.030±0.008）

Recommended Land Patterns

Surface Mounting

・Mounting and soldering conditions should be

checked beforehand.

・Applicable soldering process to this products is

reﬂow soldering only.

2000

Unit : mm (inch)

C

Type

1608

2012

2016

2518

3225

A

B

C

0.55

0.65

0.70

0.65

1.00

0.80

0.90

0.80

1.50

1.60

0.90

1.40

A

B

A

1.80

1.95

2.70

Unit : mm

■ AVAILABLE INDUCTANCE RANGE

Type

BR L3225

BRFL2518

BR L2518

BR C2518

BR C2016

BR L2012

BR C1608

Range

Imax

[mA]

Rdc±30％ Imax

[Ω] [mA]

Rdc±30％ Imax

Rdc±30％

[Ω] [mA]

[Ω]

0.2μH

0.47μH

980

0.060

1,050

0.090

2,200

1μH

0.043

0.350

2.50

1,200

1μH

0.080

1,000

850

1μH

0.080

1,650

610

1μH

0.050

1,100

520

1μH

0.085

0.400

850

0.135

0.850

520

280

0.180

0.550

1.0

2.2

850

0.135

2.2μH

4.7

470

0.400

650

0.330

4.7μH

700

250

0.350

270

10

22

47

100

220

100μH

190

100μH

3.60

170

100μH

3.40

85

100μH

7.70

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound07_e-01

134

■ PART NUMBERS

●BR C1608 type

Rated current ※）[mA]

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

[MHz] (min.)

Measuring

frequency

[MHz]

Inductance Inductance

DC Resistance

[Ω] (±30%)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

1,750

1,400

1,250

1,150

1,000

850

Idc2

980

810

800

760

660

520

410

280

BR C1608TR20M

BR C1608TR35M

BR C1608TR45M

BR C1608TR56M

BR C1608TR77M

BR C1608T1R0M

BR C1608T1R5M

BR C1608T2R2M

0.20

0.35

0.45

0.56

0.77

1.00

1.50

2.20

400

300

200

170

150

140

120

100

0.060

0.080

0.090

0.095

0.110

0.180

0.300

0.550

±20％

7.96

700

550

●BR L2012 type

Rated current ※）[mA]

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

[MHz] (min.)

Measuring

frequency

[MHz]

Inductance Inductance

DC Resistance

[Ω] (±30%)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

1,100

850

700

600

490

340

290

270

220

190

150

125

100

85

Idc2

1,050

850

750

550

440

400

350

330

300

270

220

160

110

BR L2012TR47M

BR L2012T1R0M

BR L2012T1R5M

BR L2012T2R2M

BR L2012T3R3M

BR L2012T4R7M

BR L2012T6R8M

BR L2012T100M

BR L2012T150M

BR L2012T220M

BR L2012T330M

BR L2012T470M

BR L2012T680M

BR L2012T101M

0.47

1.0

1.5

2.2

3.3

4.7

6.8

10

350

300

250

200

190

150

60

0.090

0.135

0.180

0.300

0.500

0.550

0.750

0.850

1.00

7.96

±20％

30

15

22

13

1.30

2.52

33

8.0

7.0

6.5

6.0

2.00

47

3.50

68

5.80

100

7.70

85

0.796

●BR C2016 type

Rated current ※）[mA]

Saturation current Temperature rise current

EHS (Environmental

Hazardous

Self-resonant

frequency

[MHz] (min.)

Measuring

frequency

[MHz]

Inductance Inductance

DC Resistance

[Ω] (±30%)

Ordering code

[μH]

Tolerance

Substances

RoHS

)

Idc1

1,350

1,100

910

Idc2

1,100

820

760

680

610

560

520

410

310

240

210

190

170

BR C2016T1R0M

BR C2016T1R5M

BR C2016T2R2M

BR C2016T3R3M

BR C2016T4R7M

BR C2016T6R8M

BR C2016T100□

BR C2016T150□

BR C2016T220□

BR C2016T330□

BR C2016T470□

BR C2016T680□

BR C2016T101□

1.0

1.5

2.2

3.3

4.7

6.8

10

450

370

250

140

78

39

35

28

24

13

0.085

0.150

0.180

0.220

0.270

0.330

0.400

0.600

1.00

±20％

740

660

550

450

400

310

0.10

15

22

±20％

±10％

33

1.70

270

210

47

11

2.20

68

8

2.80

200

140

100

7

3.40

●BR C2518 type

Rated current ※）[mA]

Saturation Temperature rise

current current

EHS (Environmental

Hazardous

Self-resonant

frequency

[MHz] (min.) [Ω] (±30%)

DC

Resistance

Measuring

frequency

[MHz]

Inductance

[μH]

Inductance

Tolerance

Ordering code

Substances

)

Idc1

2,550

2,100

1,800

1,450

1,250

1,050

890

Idc2

1,650

1,300

1,000

860

BR C2518T1R0M

BR C2518T1R5M

BR C2518T2R2M

BR C2518T3R3M

BR C2518T4R7M

BR C2518T6R8M

BR C2518T100□

BR C2518T150□

BR C2518T220□

BR C2518T330□

BR C2518T470□

BR C2518T680□

BR C2518T101□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

280

230

200

150

100

45

0.050

0.080

0.120

0.175

0.230

0.280

0.350

0.43

±20％

750

680

20

610

1.00

15

13

760

550

22

10

0.56

640

490

±20％

±10％

33

8

0.85

560

390

47

6.5

5.5

4.5

1.45

410

300

68

2.40

340

230

100

3.60

300

190

・Please specify the inductance tolerance code. (M or K)

※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)

※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)

※）The rated current is the DC current value that satisﬁes both of DC saturation current value and temperature rise current value.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound07_e-01

135

■ PART NUMBERS

●BR L2518 type

Rated current ※）[mA]

Saturation Temperature rise

current current

EHS (Environmental

Hazardous

Self-resonant

frequency

[MHz] (min.) [Ω] (±30%)

DC

Resistance

Measuring

frequency

[MHz]

Inductance

[μH]

Inductance

Tolerance

Ordering code

Substances

)

Idc1

1,300

1,200

900

Idc2

1,000

920

BR L2518T1R0M

BR L2518T1R5M

BR L2518T2R2M

BR L2518T3R3M

BR L2518T4R7M

RoHS

1.0

1.5

2.2

3.3

4.7

130

100

80

0.080

0.100

0.135

0.300

0.400

±20％

850

7.96

70

750

580

60

650

470

●BRFL2518 type

Rated current ※）[mA]

Saturation Temperature rise

current current

EHS (Environmental

Hazardous

Self-resonant

frequency

[MHz] (min.) [Ω] (±30%)

DC

Resistance

Measuring

frequency

[MHz]

Inductance

[μH]

Inductance

Tolerance

Ordering code

Substances

)

Idc1

1,200

1100

850

Idc2

1,200

1000

950

BRFL2518T1R0M

BRFL2518T1R5M

BRFL2518T2R2M

BRFL2518T3R3M

BRFL2518T4R7M

RoHS

1.0

1.5

2.2

3.3

4.7

130

100

80

0.090

0.110

0.130

0.220

0.330

±20％

1.00

70

700

60

650

●BR L3225 type

Rated current ※）[mA]

Saturation Temperature rise

current current

EHS (Environmental

Hazardous

Self-resonant

frequency

[MHz] (min.) [Ω] (±30%)

DC

Resistance

Measuring

frequency

[MHz]

Inductance

[μH]

Inductance

Tolerance

Ordering code

Substances

)

Idc1

2,400

2,200

1,850

1,450

1,300

1,050

900

Idc2

2,200

1,750

1,600

1,200

1,000

770

BR L3225T1R0M

BR L3225T1R5M

BR L3225T2R2M

BR L3225T3R3M

BR L3225T4R7M

BR L3225T6R8M

BR L3225T100□

BR L3225T150□

BR L3225T220□

BR L3225T330□

BR L3225T470□

BR L3225T680□

BR L3225T101□

RoHS

1.0

1.5

2.2

3.3

4.7

6.8

10

220

170

150

140

120

90

70

20

13

9

0.043

0.045

0.065

0.120

0.180

0.270

0.350

0.570

0.690

0.840

1.00

±20％

700

0.10

15

700

530

22

550

470

±20％

±10％

33

470

420

47

7

420

390

68

6

1.40

330

300

100

5

2.50

270

250

・Please specify the inductance tolerance code. (M or K)

※）The saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20℃)

※）The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40℃. (at 20℃)

※）The rated current is the DC current value that satisﬁes both of DC saturation current value and temperature rise current value.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound07_e-01

136

■ ELECTRICAL CHARACTERISTICS

DC Bias characteristics

■

（Measured by HP4285A）

BRL3225

BRC2518

101□

BRFL2518

BRL2518

100

10

101□

4R7M

10

1

10

100□

2R2M

1R0M

1

1R0M

1

1R0M

0.1

1

10

100

1000 10000

1

10

100

1000 10000

1

10

100

1000 10000

1

10

100

1000 10000

DC BIAS（mA）

BRC2016

BRL2012

BRC1608

100

10

1000

100

10

101□

2R2M

101M

10

1

100□

1

100M

R77M

1R0M

1

1R0M

R20M

0.1

1

10

100

1000 10000

1

10

100

1000 10000

1

10

100

1000 10000

DC BIAS（mA）

Impedance-vs-Frequency characteristics

■

（Measured by HP4291A）

BRC2518

BRL3225

100000

BRFL2518

4R7M

BRL2518

100000

10000

1000

10000

1000

10000

1000

4R7M

2R2M

101□

2R2M

100□

10000

100□

1R0M

1000

1R0M

100

10

1

100

10

1

1R0M

100

10

1

10

1

10

100

1000 10000

1

10

100 1000 10000

1

10

100 1000 10000

1

10

100

1000

Frequenc（y MHz）

BRC2016

BRL2012

BRC1608

2R2M

100000

10000

1000

100

100000

10000

1000

101M

100M

101□

100□

1R0M

R77M

1000

100

10

1R0M

R20M

1000

10

1

10

1

0.1

1

10

100

1000

1

10

100

1000

1

10

100

1000

Frequenc（y MHz）

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound07_e-01

137

■ PACKAGING

①Minimum Quantity

Type

⑤Reel size

Standard Quantity [pcs]

Paper Tape

Embossed Tape

3,000

2.5 or less

（0.098max）

BR C1608

BR L2012

BR C2016

BR C2518

BR L2518

BRFL2518

BR L3225

ー

3,000

2,000

3,000

2,000

②Tape Material

10.0±1.5

(0.394±0.059)

⑥Top Tape Strength

The top tape requires a peel-off force of 0.2 to 0.7N in the direction of the arrow as

illustrated below.

③Taping dimensions

◦Embossed Tape

8mm wide (0.315 inches wide)

◦Card board carrier tape 8mm wide (0.315 inches wide)

Chip cavity

Insertion pitch

Tape thickness

Type

A

B

F

T

K

1.0±0.10

1.9±1.0

4.0±0.1

0.25±0.05

1.2 max.

BR C1608

BR L2012

BR C2016

BR C2518

BR L2518

BRFL2518

BR L3225

（0.04±0.004）（0.076±0.004）（0.157±0.004）（0.01±0.002）（0.047）

1.40±0.1

2.2±0.1

4.0±0.1

0.25±0.05

1.2 max.

（0.056±0.004）（0.088±0.004）（0.157±0.004）（0.01±0.002）（0.048）

1.75±0.1 2.1±0.1 4.0±0.1 0.3±0.05 1.9 max.

（0.069±0.004）（0.083±0.004）（0.157±0.004）（0.012±0.002）（0.074）

2.15±0.1 2.7±0.1 4.0±0.1 0.3±0.05 2.2 max.

（0.085±0.004）（0.107±0.004）（0.157±0.004）（0.012±0.002）（0.086）

2.3±0.1 2.8±0.1 4.0±0.1 0.3±0.05 1.45 max.

（0.092±0.004）（0.112±0.004）（0.157±0.004）（0.012±0.002）（0.057）

2.15±0.1

2.8±0.1

4.0±0.1

0.25±0.05

1.25 max.

（0.049）

1.9 max.

（0.085±0.004）（0.112±0.004）（0.157±0.004）（0.01±0.002）

2.8±0.1

3.5±0.1

4.0±0.1

0.25±0.05

（0.112±0.004）（0.140±0.004）（0.157±0.004）（0.01±0.002）（0.074）

Unit : mm (inch)

④Leader and Blank portion

Blank portions

Chip cavity

Blank portions

Leader

160 to 320mm

160 to 200 mm

（6.3 to 12.8 inches）

（6.3 to 7.87 inches）

400 to 560 mm

（16.0 to 22.4 inches）

Direction of tape feed

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound07_pack_e-01

wound07_pack-P1

■ RELIABILITY DATA

1. Operating Temperature Range

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

ー25～＋105℃

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

ー25～＋120℃

ー25～＋105℃

NR10050 Type

【Test Method and Remarks】

Including self-generated heat

2. Storage Temperature Range

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

ー40～＋85℃

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : 0 to 40℃ for the product with taping.

NR10050 Type : 0～40℃ for the product with taping.

3. Rated current

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Within the speciﬁed tolerance

NR10050 Type

4. Inductance

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Within the speciﬁed tolerance

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : LCR Meter : HP 4285A or equivalent, Measuring frequency : Speciﬁed frequency

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : LCR Meter : HP 4285A or equivalent, 100KHz, 1V

NR10050 Type

: LCR Meter : HP 4263A or equivalent, 100KHz, 1V

5. DC Resistance

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Within the speciﬁed tolerance

NR10050 Type

【Test Method and Remarks】

DC ohmmeter : HIOKI 3227 or equivalent

6. Self resonance frequency

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Within the speciﬁcation

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :

Inpedance analyzer/material analyzer : HP4291A or equivalent HP4191A, 4192A or equivalent

7. Temperature characteristic

BRL2012, BRC2016, BRL2518, BRL3225, BRC2518, BRFL2518

Inductance change : Within ±15%

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

BRC1608

Inductance change : Within ±20%

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Inductance change : Within ±20%

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :

Measurement of inductance shall be taken at temperature range within －25℃～＋85℃.

With reference to inductance value at ＋20℃., change rate shall be calculated.

Change of maximum inductance deviation in step 1 to 5

Temperature at step 1

Temperature at step 2

Temperature at step 3

Temperature at step 4

Temperature at step 5

20℃

Minimum operating temperature

20℃ (Standard temperature)

Maximum oparating temperature

20℃

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0407_reli_e-01

wound0407_reli-RP1

■ RELIABILITY DATA

8. Resistance to ﬂexure of substrate

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

No damage.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type

:

The test samples shall be soldered to the test board by the reﬂow. As illustrated below, apply force in the direction of the arrow indicating until deﬂection of the test board

reaches to 2 mm.

Force Rod

20

10

Test board size

Test board material

: 100×40×1.0

: glass epoxy-resin

R230

Solder cream thickness : 0.12 (BR Series)

0.10 (NR30/40, NRV30, NRH24/30,NRG40)

0.15 (NR50/60/80, NRS50/60)

Board

Test Sample

R5

45±2mm

Land dimension（NR, NRS50）

Land dimension（BRL2012）

Land dimension（BRC1608）

Land dimension（BRL3225）

Land dimension（NR60, NRS60）

Land dimension（NR30, NRH30, NRV30）

0.9

4.0

1.4

2.7

5.7

0.8

0.55

1.5 2.1 1.5

0.8 1.4 0.8

1.6 3.1 1.6

0.65 0.9 0.65

1.0 1.6 1.0

Land dimension（BRL2518,BRC2518,BRFL2518） Land dimension（NRH24）

1.95 2.0

Land dimension（NR40, NRG40） Land dimension（NR80）

Land dimension（ＢＲＣ2016）

3.7

7.5

1.8

0.7 0.8 0.7

0.65 1.5 0.65

0.7 0.75 0.7

1.2 1.6 1.2

1.8 3.8 1.8

Printed board thickness : 1.0mm

Unit : mm

9. Insulation resistance : between wires

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

10. Insulation resistance : between wire and core

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

11. Withstanding voltage : between wires and core

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

12. Adhesion of terminal electrode

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Shall not come off PC board.

NR10050 Type

【Test Method and Remarks】

BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type

The test samples shall be soldered to the test board by the reﬂow.

:

・Applied force

: 10N to X and Y directions.

: 5s.

・Duration

10N, 5s

・Solder cream thickness : 0.15mm.

BRC1608, NR10050 Type :

・Applied force : 5N to X and Y directions.

・Duration

: 5s.

13. Resistance to vibration

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Inductance change : Within ±10%

No signiﬁcant abnormality in appearance.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :

The test samples shall be soldered to the test board by the reﬂow.

Then it shall be submitted to below test conditions.

Frequency Range

Total Amplitude

10～55Hz

1.5mm (May not exceed acceleration 196m/s²)

Sweeping Method

10Hz to 55Hz to 10Hz for 1min.

X

Time

Y

Z

For 2 hours on each X, Y, and Z axis.

Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0407_reli_e-01

wound0407_reli-RP2

■ RELIABILITY DATA

14. Solderability

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

At least 90％ of surface of terminal electrode is covered by new solder.

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050Type :

The test samples shall be dipped in ﬂux, and then immersed in molten solder as shown in below table.

Flux : Methanol solution containing rosin 25%.

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :

Solder Temperature

Time

245±5℃

5±1.0 sec.

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :

Solder Temperature

Time

245±5℃

5±0.5 sec.

※Immersion depth : All sides of mounting terminal shall be immersed.

15. Resistance to soldering heat

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Inductance change : Within ±10%

NR30/40/50/60/80, NRV30, NRG40,

No signiﬁcant abnormality in appearance.

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :

3 times of reﬂow oven at 230℃ MIN. for 40sec. with peak temperature at 260_ー^＋0₅℃ for 5sec.

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type

:

The test sample shall be exposed to reﬂow oven at 230±5℃ for 40 seconds, with peak temperature at 260±5℃ for 5 seconds, 2 times.

NR6020 Type :

The test sample shall be exposed to reﬂow oven at 230±5℃ for 40 seconds, with peak temperature at 250_ー^＋0₅℃ for 5 seconds, 2 times.

Test board thickness : 1.0mm

Test board material : glass epoxy-resin

16. Thermal shock

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Inductance change : Within ±10%

NR30/40/50/60/80, NRV30, NRG40,

No signiﬁcant abnormality in appearance.

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :

The test samples shall be soldered to the test board by the reﬂow. The test samples shall be placed at speciﬁed temperature for speciﬁed time by step 1 to step 4 as shown

in below table in sequence. The temperature cycle shall be repeated 100 cycles.

Conditions of 1 cycle

Step

Temperature (℃)

ー40±3

Room temperature

Duration (min)

30±3

Within 3

1

2

3

4

＋85±2

Room temperature

30±3

Within 3

17. Damp heat

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Inductance change : Within ±10%

No signiﬁcant abnormality in appearance.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :

Temperature

Humidity

Time

60±2℃

90～95%RH

1000 hours.

Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :

The test samples shall be soldered to the test board by the reﬂow.

The test samples shall be placed in thermostatic oven set at speciﬁed temperature and humidity as shown in below table.

Temperature

Humidity

Time

60±2℃

90～95%RH

500±24hour

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0407_reli_e-01

wound0407_reli-RP3

■ RELIABILITY DATA

18. Loading under damp heat

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Inductance change : Within ±10%

No signiﬁcant abnormality in appearance.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :

Temperature

Humidity

60±2℃

90～95％RH

Rated current

1000hours.

Applied current

Time

Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :

The test samples shall be soldered to the test board by the reﬂow.

The test samples shall be placed in thermostatic oven set at speciﬁed temperature and humidity and applied the rated current continuously as shown in below table.

Temperature

Humidity

60±2℃

90～95％RH

Rated current

500±2hour

Applied current

Time

19. Low temperature life test

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Inductance change : Within ±10%

No signiﬁcant abnormality in appearance.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :

Temperature

Duration

ー40±2℃

1000hours

Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type :

The test samples shall be soldered to the test board by the reﬂow.

After that, the test samples shall be placed at test conditions as shown in below table.

Temperature

Time

－40±3℃

500±24hour

20. High temperature life test

BRC1608, BRL2012, BRC2016, BRC2518, Inductance change : Within ±10%

BRFL2518, BRL2518, BRL3225 Type

No signiﬁcant abnormality in appearance.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Inductance change : Within ±10%

No signiﬁcant abnormality in appearance.

NR10050 Type

【Test Method and Remarks】

BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type :

Temperature

Duration

85±2℃

1000hours

Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

NR10050 Type :

Temperature

Time

105±3℃

500±24hour

Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs.

21. Loading at high temperature life test

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Inductance change : Within ±10%

No signiﬁcant abnormality in appearance.

NR10050 Type

【Test Method and Remarks】

NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type :

The test samples shall be soldered to the test board by the reﬂow soldering.

Temperature

Applied current

Time

85±2℃

Rated current

500±24hour

22. Standard condition

BRC1608, BRL2012, BRC2016, BRC2518,

BRFL2518, BRL2518, BRL3225 Type

Standard test condition :

Unless otherwise speciﬁed, temperature is 20±15％ and 65±20％of relative humidity.

When there are question concerning measurement result : In order to provide correlation date, the test shall be condition of 20±2℃

of temperature, 65±5% relative humidity.

NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Inductance is in accordance with our measured value.

NR10050 Type

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0407_reli_e-01

wound0407_reli-RP4

■ PRECAUTIONS

SMD Inductors

1. Circuit Design

◆Operating environment

1.The products described in this speciﬁcation are intended for use in general electronic equipment,(ofﬁce supply equipment, telecommunications systems,

measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high

reliability (trafﬁc systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where

product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance.

Precautions

2. PCB Design

◆Land pattern design

1.Please refer to a recommended land pattern.

Precautions

◆Land pattern design

Technical

consider-

ations

Surface Mounting

・Mounting and soldering conditions should be checked beforehand.

・Applicable soldering process to this products is reﬂow soldering only.

3. Considerations for automatic placement

◆Adjustment of mounting machine

1.Excessive impact load should not be imposed on the products when mounting onto the PC boards.

Precautions

2.Mounting and soldering conditions should be checked beforehand.

Technical

consider-

ations

◆Adjustment of mounting machine

1. When installing products, care should be taken not to apply distortion stress as it may deform the products.

4. Soldering

Precautions

◆Reﬂow soldering

1. Please contact any of our ofﬁces for a reﬂow soldering, and refer to the recommended condition speciﬁed.

2. This products is reﬂow soldering only.

3. Please do not add any stress to a product until it returns in normal temperature after reﬂow soldering.

◆Lead free soldering

1.When using products with lead free soldering, we request to use them after conﬁrming of adhesion, temperature of resistance to soldering heat, soldering etc

sufﬁciently.

◆Recommended conditions for using a soldering iron (NR10050 Type)

・Put the soldering iron on the land-pattern.

・Soldering iron's temperature - Below 350℃

・Duration - 3 seconds or less

・The soldering iron should not directly touch the inductor.

◆Reﬂow soldering

1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of

the products.

・BRC1608, BRL2012, BRL2518,

BRC2016, BRL3225 Type BRC2518, BRFL2518

Recommended reﬂow condition (Pb free solder)

・NR30/40/50/60/80, NRV30, NRG40,

NRH24/30, NRS50/60 Type

Recommended reﬂow condition (Pb free solder)

・NR10050 Type

Recommended reﬂow condition (Pb free solder)

Technical

consider-

ations

5sec max

300

5sec max

300

5sec max

300

200

100

Peak：

150～180

260＋0/ー5℃

250＋0/ー5℃

250＋5/ー0℃

200

100

30±10sec

230℃ min

30±10sec

230℃ min

100

230℃ min

90±30sec

0

Ｈeating Time【sec】

5. Cleaning

Precautions

◆Cleaning conditions

1. Washing by supersonic waves shall be avoided.

Technical

consider-

ations

◆Cleaning conditions

1. If washing by supersonic waves, supersonic waves may cause broken products.

6. Handling

Precautions

◆Handling

1. Keep the product away from all magnets and magnetic objects.

◆Breakaway PC boards (splitting along perforations)

1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deﬂection or twisting to the board.

2. Board separation should not be done manually, but by using the appropriate devices.

◆Mechanical considerations

1. Please do not give the product any excessive mechanical shocks.

2. Please do not add any shock and power to a product in transportation.

◆Pick-up pressure

1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part.。

◆Packing

1. Please avoid accumulation of a packing box as much as possible.

◆Breakaway PC boards (splitting along perforations)

1. Planning pattern conﬁgurations and the position of products should be carefully performed to minimize stress.

◆Mechanical considerations

Technical

consider-

ations

1. There is a case to be damaged by a mechanical shock.

2. There is a case to be broken by the handling in transportation.

◆Pick-up pressure

1. Damage and a characteristic can vary with an excessive shock or stress.

◆Packing

1. There is a case that transformation and a product of tape are damaged by accumulation of a packing box.

7. Storage conditions

◆Storage

1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should

be controlled.

・Recommended conditions

Ambient temperature: 0～40℃

Precautions

Humidity

: Below 70% RH

The ambient temperature must be kept below 30℃. Even under ideal storage conditions, solderability of products electrodes may decrease as time passes.

For this reason, product should be used within 6 months from the time of delivery.

In case of storage over 6 months, solderability shall be checked before actual usage.

Technical ◆Storage

consider-

ations

1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of

taping/packaging materials may take place.

＊This catalog contains the typical speciﬁcation only due to the limitation of space. When you consider purchase of our products, please check our speciﬁcation.

For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.

wound0407_reli_e-01

wound0407_reli-RP5


型号：	CB2012T101
厂家：	TAIYO YUDEN (U.S.A.), INC
描述：	WOUND CHIP INDUCTORS 绕线贴片电感
文件：	总47页 (文件大小：2184K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CB2012T101 [TAIYO YUDEN]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E